Overview
LANDTEK FM-204-2K Simple Force Gauge is a small, simple and High Accuracy thrust and tension testing instrument, which is widely used in Electronics, Construction Hardware, Light Industry Spinning & Weaving, Auto Parts, Lighters and other ignition devices, fire equipment, pen making, lock making, fishing gear, chemical industry, power machinery, scientific research institutions and other industries. Push-pull load, plug force test, Destructiveness test, etc.
Features
1. High Accuracy and resolution
2. Numbers are displayed, ignoring the difference
3. Four measurement units of N (newton), kg (kilogram), lb (pound), g (gram) are available and converted to each other
4. Peak hold function, keep peak display until manually cleared
5. Green and environmentally friendly, it can be set to automatically shut down without operation for 10 minutes; it can also be shut down manually.
6. Can be powered by alkaline battery; can also be connected to 6V DC power supply
Principle
The Force Gauge converts the force value into a digital signal through the measurement of push-pull loads, displays the measurement results on a large four-digit LCD screen, and supports peak hold and instantaneous value measurement functions.
Applications
Electronics, Construction Hardware, Light Industry Spinning & weaving, Auto Parts, Lighters and other ignition devices, Fire Equipment, Pen Making, Lock Making, Fishing Tackle, Chemical Industry, Power Machinery, Scientific Research Institutions
Steps
1. Install the battery or connect the 6V DC power supply
2. Select the desired measurement unit (N, kg, lb, g)
3. Perform a push-pull test
4. Measured values (peak or instantaneous) read on the display
5. When using the peak hold function, manually clear the zero
6. After the test is completed, you can manually shut down or wait 10 minutes for automatic shutdown.
Notice
* Avoid exceeding the allowable load of 150% F.s, and there will be a beep alarm when exceeding 110% F.s
* The working environment should be free of source and corrosion medium
* Operating temperature 0~ 40 ℃
* Allowable relative humidity < 80%
Make sure the power supply is sufficient before use (2 AA batteries or 6V DC power supply)
* Pay attention to the correct selection of measurement units
