Overview
LANDTEK FM-204-50K Simple Force Gauge is a small, simple and High Accuracy thrust and tension testing instrument, which is widely used in Electronics, Construction Hardware, Light Industry Spinning & Weaving, Auto Parts, Lighters and other ignition devices, fire equipment, pen making, lock making, fishing gear, chemical industry, power machinery, scientific research institutions and other industries. Push-pull load, plug force test, Destructiveness test, etc.
Features
1. High Accuracy and resolution
2. Numbers are displayed, ignoring the difference
3. Three measurement units of N (newton), kg (kilogram), and lb (pound) are available and can be converted to each other
4. Peak hold function, keep peak display until manually cleared
5. Green and environmentally friendly, it can be set to automatically shut down without operation for 10 minutes; it can also be shut down manually.
6. Can be powered by alkaline battery; can also be connected to 6V DC power supply
Principle
LANDTEK FM-204-50K Force Gauge converts mechanical force into electrical signal through Sensor measurement of push-pull load, and displays measurement results on a four-digit large LCD screen after processing. It supports peak hold and a variety of unit conversion functions.
Applications
Electronics, Construction Hardware, Light Industry Spinning & weaving, Auto Parts, Lighters and other ignition devices, Fire Equipment, Pen Making, Lock Making, Fishing Tackle, Chemical Industry, Power Machinery, Scientific Research Institutions
Standards
Precision: 0.5 grade
Steps
1. Install 2 AA batteries or connect 6V DC power supply
2. Select N (newton), kg (kilogram), lb (pound) measurement units
3. Perform a push-pull test
4. Use Peak Hold to record maximum Measured values
5. Manually clear or wait 10 minutes for automatic shutdown
Notice
* The working environment should be free of source and corrosion medium
* Operating temperature 0~ 40 ℃
* Allowable relative humidity < 80%
* Allowable load is 150% F.s, there is a beep alarm when it exceeds 110% F.s
* Measurement range is +/- 490N, do not use beyond range
