Overview
LANDTEK FM-204-100K Simple Force Gauge is a small, simple and High Accuracy thrust and tension testing instrument, which is widely used in Electronics, Construction Hardware, Light Industry Spinning & Weaving, Auto Parts, Lighters and other ignition devices, fire equipment, pen making, lock making, fishing gear, chemical industry, power machinery, scientific research institutions and other industries. Push-pull load, plug force test, Destructiveness test, etc.
Features
1. High Accuracy and high resolution.
2. Numbers show, ignoring the difference.
3. N (newton), kg (kilogram), lb (pound) three measurement units are available for selection and conversion.
4. Peak hold function. Keep peak display until manually cleared.
5. Green and environmentally friendly, it can be set to automatically shut down without operation for 10 minutes; it can also be shut down manually.
6. Can use alkaline battery power supply; can also be connected to 6V DC power supply.
Principle
The Force Gauge converts mechanical signals into electrical signals through Sensor measurement of thrust or tensile loads, and digitally displays the Measured value on a large four-digit LCD screen after processing. It supports peak holding and various unit conversions.
Applications
Electronics, Construction Hardware, Light Industry Spinning & weaving, Auto Parts, Lighters and other ignition devices, Fire Equipment, Pen Making, Lock Making, Fishing Tackle, Chemical Industry, Power Machinery, Scientific Research Institutions
Standards
Precision: 0.5 grade
Steps
1. Install the battery or connect the 6V DC power supply.
2. Measurement unit (N, kg, lb).
3. Perform a thrust or pull test, and the display screen displays the value in real time.
4. Use the peak hold function to record the MAX Maximum.
5. Manually clear or wait for automatic shutdown.
Notice
* Avoid overload use, allowing a load of 150% F.s, and a beep alarm when it exceeds 110% F.s.
* The working environment should be free of source and corrosion medium.
* Operating temperature is 0~ 40 ℃.
* Shut down in time after use or use the automatic shutdown function to save power.
