Overview
LANDTEK FM-204-500K Simple Force Gauge is a small, simple and High Accuracy thrust and tension testing instrument, which is widely used in Electronics, Construction Hardware, Light Industry Spinning & Weaving, Auto Parts, Lighters and other ignition devices, fire fighting equipment, pen making, lock making, fishing gear, chemical industry, power machinery, scientific research institutions and other industries. Push-pull load, plug force test, Destructiveness test, etc.
Features
1. High Accuracy and high resolution.
2. Numbers show, ignoring the difference.
3. N (newton), kg (kilogram), lb (pound) three measurement units are available for selection and conversion.
4. Peak hold function. Keep peak display until manually cleared.
5. Green and environmentally friendly, it can be set to automatically shut down without operation for 10 minutes; it can also be shut down manually.
6. Can use alkaline battery power supply; can also be connected to 6V DC power supply.
Principle
The Force Gauge converts physical forces into electrical signals through the measurement of push-pull loads through the built-in Sensor structure, and digitally displays the Measured value on a large four-digit LCD screen after processing. It supports peak hold function to record the maximum load.
Applications
Electronics, Construction Hardware, Light Industry Spinning & weaving, Auto Parts, Lighters and other ignition devices, Fire Equipment, Pen Making, Lock Making, Fishing Tackle, Chemical Industry, Power Machinery, Scientific Research Institutions
Standards
Precision: 0.5 grade
Steps
1. Install the battery or connect the 6V DC power supply.
2. Measurement unit (N, kg, lb).
3. Perform a push-pull force test, and the display screen displays the load value in real time.
4. Use the peak hold function to record the maximum load and manually clear it to reset.
5. After the test is completed, you can shut down manually or wait for 10 minutes to shut down automatically without operation.
Notice
* Ensure stable power supply, use 2 AA alkaline batteries or 6V DC power supply.
* Pay attention to the load range during measurement to avoid overloading.
* Periodically calibrated to maintain accuracy, Indication Error is +/- 0.5% FS (Range) +/- 1 Digital Peak.
* Clear the peak display in time after use to avoid data confusion.
Pay attention to environmental protection and set the automatic shutdown time reasonably to save energy.
