Overview
SMART SENSOR AS8800L Combustible Gas detector is a Portable gas leak concentration detection instrument, mainly used to detect flammable gases such as natural gas, gas, biogas. It uses gas Sensor technology to quickly detect the type and concentration of gases in the environment, which is suitable for various industrial and safety monitoring scenarios.
Features
1. Using semiconductor Sensor principle, detection sensitivity can be adjusted to 50PPM (methane)
2. Fast Response Time, ≤ 1 second
3. Equipped with LED light Alarm mode and LED row light analog quantity prompt
4. Support low power indication and external power supply function
5. Portable design, weight only 220g, powered by 3 1.5V AA batteries
6. Strong environmental adaptability, Temperature range 0~ 50 ℃, Humidity ≤ 80% RH No condensation
7. Warm-Up Time is short, < 110 seconds/< 90 seconds (25 ℃, 60% RH)
8. Working hours up to 9 hours
Principle
The detector uses a semiconductor gas Sensor to detect the composition and concentration of gases in the environment. When a combustible gas comes into contact with the Sensor, it causes a change in the electrical characteristics of the Sensor. This change is measured to determine the gas concentration and alarms through LED lights when a preset threshold is reached.
Applications
Industrial safety monitoring, gas leak detection, environment monitoring, safe production sites
Steps
1. Install 3 1.5V AA batteries
2. Boot warm-up (< 110 seconds/< 90 seconds)
3. Adjust Sensitivity to Required Settings
4. Gas detection in the detection area
5. Observe the LED light alarm indication and analog quantity prompt
6. Pay attention to the low power indication, replace the battery in time or use an external power supply
Notice
• Please use at 0~ 50 ℃ Ambient Temperature
• Environmental humidity should be ≤ 80% RH and no condensation
• Pay attention to the battery power and replace it in time
Avoid use in extreme environments
• Regularly check Sensor performance
• Pay attention to the alarm instructions when using
