Hydraulic automatic pull-off test, the pull-off speed is stable and controllable, the accuracy is +/- 1% full scale, equipped with pull-off kit size 10-50mm, built-in rechargeable battery and 200,000 Data storage.
High Accuracy S type sensor accuracy of 0.5%, range 0-10KN, with pull-off automatic stop function, three operation modes optional, can directly enter the test block area display force value and strength value
Measurement range 20~ 1000J/m ², resolution 0.1J/m ², with Touchscreen operation and thermal printing function, suitable for a variety of Cardboard Internal Bond Strength accurate determination.
With 0.5 accuracy class and 1000N range, support force holding time 0-999.9 seconds can be set, integrated pull-off stop and overload protection functions, easy and reliable operation.
The two-stage gravity overlap structure ensures accurate measurement, with a resolution of 0.001 lbf/in ², supports fully automatic release and real-time calibrating, and is suitable for internal bond strength testing of various sheet materials.
Adopt S-type Tension Sensor to Ensure High Accuracy, Built-in Micro Hydraulic System, Support Strength and Force Measurement modes, Continuous Operating Time over 200 hours, Range 0~ 10KN.
Adopt double guide Rod structure to ensure Stability, Maximum Measured value 5000N, Travel 220mm, support stepless speed regulation and a variety of test modes, with pull-off stop and force retention functions.
Range 10kN, accuracy ≤ +/- 1.0% F.S, using mechatronics design, weight only 2.8kg, handle operation labor-saving, can directly display the strength value and have automatic shutdown function.
Maximum pull-out force 40kN, using three-point reaction support and post-loading pull-out method principle, with color Touchscreen display force value and time Linear dispersion, support automatic storage of 10000 data.
Portable design built-in lithium battery, 0-3000p range accuracy +/- 1%, equipped with 10-50mm pull-off spindle, automatic calculation of pull-off force without conversion table, aluminum alignment unit to ensure uniform testing.
The maximum pull-out force is 300kN, the central aperture is 45mm, and it adopts a hollow self-resetting hydraulic cylinder design. The reading can be directly read the tensile force value, and the service life is long and it is light to carry.
Adopt low-noise stepless speed regulation motor, with a speed range of 0-500mm/min, with force holding function and four test modes, equipped with limit protection device, support pull-off stop and set force value round-trip motion.
Using mechatronic portal structure, equipped with 65mm pull Travel and 0.001kN resolution Sensor, support 500 Data storage and full scale 6 segment line correction, suitable for on-site rapid detection.
Measurement range 20-1000J/m ², accuracy of +/- 1-2J/m ², support 25.4mm sample size and 0-40kg/cm ² adjustable clamping force, equipped with thermal printer and LCD display.
Range 0~ 6.000kN, accuracy ≤ +/- 1%, drawing Travel 10mm, compact structure can be continuously uniformly loaded, automatically maintain the peak bonding force, suitable for low bonding force detection.
