Each set contains 8 different sizes of anchors, covering a diaMeter range of Φ 6 to Φ 25, designed for the RJ-20 bolt puller to ensure test compatibility and accuracy.
The blade width is 140mm and the Rod length is 800mm, which pRoduces tangential flow to form a high shear rate, which is suitable for polymer reaction and mineral dispersion, and effectively prevents medium deposition.
Low-speed stirring pRoduces tangential flow, the edge forms a high shear rate, the blade width is 90mm, and the Rod length is 650mm, which is suitable for polymer reaction and mineral dispersion to prevent medium deposition.
Low-speed stirring pRoduces tangential flow, the edge forms a high shear rate, preventing the medium from depositing the container wall, suitable for polymer reaction and mineral dispersion, the blade width is 70mm, and the Rod length is 500mm.
Electric Pump with double oil path plunger, high voltage 63MPa, Measurement accuracy +/- 1.5%, Peak hold and Data storage function, Hollow structure is convenient for anchor cable detection and operation.
Hollow self-resetting structure, maximum pulling force 10kN, piston Travel 25mm, with 100 data storage and peak hold function, compact and portable structure.
The blade width is 100mm and the height is 60mm, and the Rod length is 300mm, generating tangential flow and high shear rate to prevent medium deposition, making it suitable for low-speed stirring.
When running at low speed, a tangential flow is generated, and the edge forms a high shear rate. The blade width is 70mm and the Rod length is 350mm, which effectively prevents the deposition of media and is suitable for medium and high viscosity fluids.
A set of 8 different specifications of anchors, covering the diaMeter range of Φ 6 to Φ 20, is specially designed for bolt pullers to meet a variety of testing requirements.
Equipped with 15 adapters of different sizes, covering M6 to M39 thread sizes, it is suitable for a variety of bolt types to ensure compatibility and accuracy in testing.
Four-blade structure design, blade width 70mm, Rod length 300mm, low-speed operation to pRoduce tangential flow, the edge of the formation of high shear rate, effectively prevent media deposition, suitable for high viscosity fluid mixing.
When stirring, a tangential flow is generated, and a high shear rate is formed at the edge to prevent medium deposition. The blade width is 100mm and the height is 60mm, and the Rod diaMeter is 8mm, which is suitable for low-speed and mild stirring.
With 1000KN Measurement range and 50mm displacement detection capability, it can simultaneously monitor tensile displacement temperature paraMeters, support 1000 Data storage and USB Communication interface, and adopt overload protection structure to ensure safe use.
Adapted diaMeter 16mm formed Metering Rod, the total length of 2000mm, through the special structure to correct the straightness of the Rod body, to ensure stable rotation and full contact with the substrate, improve the thickness control accuracy of Spreader.
Measurement range up to 1000KN, hollow self-reset design, cylinder Travel 150mm, digital pressure Gauge can directly read the force value, with peak holding, storage, clearing, query and automatic shutdown functions.
