With tracking pointer and peak pointer double pointer design, pressing needle Travel 0-2.5 mm, Measurement range 10-90Hc, suitable for material testing with pressure above 0.049MPa when the compression rate is 50%, and can be matched with test bracket to improve Stability.
Pin Travel 0~ 2.5mm, Measurement range 0~ 100HA, Error +/- 1HA, Dual pointer design can display real-time and peak Hardness value at the same time, easy to use handheld or rack.
Double pointer design with peak holding and continuous load indication function, external tolerance indicator to facilitate force value judgment, Maximum Measured value 10KN, suitable for electromagnetic interference occasions.
Dual pointer design with peak holding and continuous load indication function, Maximum Measured value 20KN, with external tolerance indicator to facilitate force value judgment, suitable for electromagnetic interference environment.
Double pointer design to achieve peak holding and continuous load indication, external tolerance indicator to facilitate force value judgment, Maximum Measured value 200KN, Indication Error +/- 2% FS, suitable for electromagnetic interference environment.
With dual pointer design can display peak and continuous load at the same time, external tolerance indicator is easy to judge the force value, the maximum Measured value is 100KN, Indication Error +/- 2% FS, suitable for electromagnetic interference environment.
Double pointer design for easy reading, Pin Travel 0~ 2.5mm, Measurement range 0~ 100HD, error +/- 1HD, lightweight and portable only 0.16kg, suitable for on-site Hardness detection.
The imported central guide Rod material has high accuracy and abrasion resistance, the shell is made of super hard aluminum material to resist on-site damage, and the external spring coil pointer slider structure is easy to adjust the friction force. The nominal kinetic energy is 2.207J, and the strength measurement range is 20-60Mpa.
With penetrating AISI 316 stainless steel Probe, easy to clean and insert semi-solid pRoducts. With CAL Check ™ boot self-check function, temperature accuracy of +/- 0.2 ℃, Measurement range covering -50.0~ 220 ℃.
Film thickness 0.1-15 mm, output high voltage 0.8-30 KV stepless adjustable, using integrated high voltage generator to overcome static electricity, sound and light alarm function is suitable for different coating mass detection.
Suitable for low and medium Hardness material measurement, pressure needle end pressure 0.55N-8.06N, pressure needle stroke 0-2.5 mm, can be matched with test rack to reduce manual operation error, improve test accuracy and Repeatability.
Temperature range RT + 5~ 300 ℃, Temperature Fluctuation +/- 1%, equipped with independent temperature controller, hot air circulation system consists of low noise fan and air duct, indoor shelf height and quantity can be adjusted.
Temperature range RT + 5~ 300 ℃, Temperature Fluctuation +/- 1%, equipped with hot air circulation system and double-decked tempered Glass observation window, the height and number of shelves in the studio can be adjusted, which is convenient for accessing samples of different specifications.
Dual pointer design can display the current value and peak value at the same time, the pressure at the end of the crimp is 445mN, and the measurement error is +/- 1HD, which is suitable for plastic sample condition adjustment testing.
Foldable stainless steel probe design, temperature range -49.9~ 49.9 ℃, Accuracy up to +/- 0.5 ℃, equipped with large LCD display and Fahrenheit switching function, easy to high temperature liquid safety measurement.
