Wet Film Gauge Measurement Scale

Overview Products Knowledge Terms

The wet film gauge is a tool for measuring the thickness of wet paint films. It determines the thickness by using a toothed structure to contact the surface of the wet film and reading the scale difference between the positions where the tips and roots of the teeth make contact. It is used for on-site rapid monitoring of coating quality to ensure that the coating thickness meets process requirements, commonly employed in coating applications such as shipbuilding and steel structures.

Selection

The range of the wet film gauge should be selected to match the thickness range of the coating being measured. For conventional coatings, a range of 0-200 μm is recommended, while for thick slurry coatings, a range of 0-500 μm is suitable. Consider the tooth structure to ensure compatibility with curved surfaces of different substrates, and opt for stainless steel material for corrosion resistance. Verify the metrological calibration certificate to ensure the reliability of the measurement values.

Terms

Large weighing balance

Instruments

YONGLIDA SHG-750 wet film thickness Gauge Wet Film Comb Stainless Steel 50-950 microns

Stainless steel material is sturdy and durable, with a range of 50-950 microns, Division 50 and 100 microns, and a compact shape of only 65 * 43 * 1.5mm, suitable for rapid measurement of wet film thickness on site.

$ 119.00

YONGLIDA SHG-200 wet film thickness Gauge Wet Film Comb stainless steel 20~ 200μm range

Made of stainless steel, the thickness is only 1.5mm, the range is 20~ 200μm, Division 20μm, the card design is convenient for quick measurement of wet-film Coating thickness on site.

$ 119.00

YONGLIDA QUL-500 wet film thickness Gauge Thickness Wheel Stainless steel roller type 0~ 500μm

Roller type design, range 0~ 500μm, stainless steel material to ensure durability, suitable for on-site rapid measurement wet film thickness, in line with a number of execution standards.

$ 146.00

JINGKELIAN QUL (0-150) wet film thickness Gauge

In line with ISO2808-1974 standard, the range is 0~ 150μm, the accuracy is not more than 5μm, can measure the wet film thickness and estimate dry-film thickness, suitable for laboratory and pRoduction control.

$ 127.00

TRUIT TR 5508/50 Wet Film Wheel, stainless steel 0~ 50μm range

Using stainless steel material, range 0~ 50μm, Graduation 2μm, wheel structure with dial, by comparing the scale and Coating adsorption quickly evaluate the wet film thickness to ensure the construction mass.

$ 191.00

JINGKELIAN QUL (0-500) wet film thickness Gauge 0~ 500μm range

In line with ISO2808 standard, the range is 0~ 500μm, the accuracy is not more than 5μm, can measure the wet film thickness and estimate dry-film thickness, suitable for laboratory and pRoduction site.

$ 127.00

TRUIT TR 5508/2000 Wet Film Wheel, stainless steel, range 0~ 2000μm

Using stainless steel material, range 0~ 2000μm, Graduation 100μm, wheel structure with dial, by comparing the scale and Coating adsorption quickly evaluate the wet film thickness to ensure the construction mass.

$ 191.00

HuiNuo KTQ-400 Adjustable scale Film Applicator film range 0~ 5000 micron accuracy +/- 2μm

Adopt scale differential head adjustment, Graduation 10μm, film thickness 0~ 5000μm adjustable, accuracy +/- 2μm, Drawdown blade straightness +/- 2μm, die steel material wear and corrosion resistance.

$ 519.00

PUSHEN SHG 20-200 Comb type wet film thickness Gauge, stainless steel unilateral type 20~ 200μm

Made of stainless steel, durable and repeatability; range 20~ 200μm, Division 20μm, step number of teeth 10, unilateral design is convenient for vertical pressing into wet-film measurement, in line with international standards.

$ 109.00

PUSHEN SHG 10-100 comb type wet film thickness Gauge, stainless steel unilateral type 10~ 100μm range

The stainless steel material is durable, the range is 10~ 100μm Division 10μm, the unilateral design is convenient for vertical pressing into the wet-film measurement, and the number of teeth 10 can accurately read the thickness value between the infiltrated and uninfiltrated teeth.

$ 109.00

DUBAN DB10-2000 Wet Film Comb polygon wet film thickness measurement instrument

Polygonal structure design, range 25~ 2032µm, in line with GB/T1764-79, GB/T134522-92, ISO 2808-74 standards, suitable for Paints, varnish and other Coating wet film thickness measurement.

$ 106.00

HuiNuo KTQ-600 Adjustable Preparation scale Film Applicator Adjustable Film Applicator 0~ 5000μm +/- 5μm

Adopt scale differential head adjustment, Graduation 10μm, film range 0~ 5000μm, accuracy +/- 5μm, Drawdown blade straightness +/- 2μm, die steel material to ensure high wear resistance and corrosion resistance.

$ 896.00

PUSHEN SHG 50-950 Comb type wet film thickness Gauge, stainless steel one-sided type range to 950μm

Made of precision stainless steel, with a range of 50 to 950 μm, the 10-step tooth design can accurately measure wet film thickness, ensure painting mass and avoid material waste.

$ 109.00

TRUIT TR 5501/700 Single-sided wet-film thickness Gauge 250~ 700μm

Made of corrosion-resistant stainless steel, the thickness range is 250~ 700 μm, Graduation 50 μm, and fast and accurate wet film thickness measurement is achieved through the toothed structure.

$ 102.00

PUSHEN YQH-500 wet-film roller Thickness Gauge Wheel type wet film thickness Gauge 0-500μm

The three-wheel structure design is adopted, and the center wheel contacts the film directly for reading. The measuring range is 0-500 μm and the indexing is 25 μm. It can perform nondestructive thickness measurement on plane and curved surface.

$ 186.00

Articles

Shore Durometer Selection: Matching Principles of Hardness Models and Measurement Ranges

This article introduces the selection method for Shore durometers, with the core focus on ensuring that the hardness type matches the material's hardness range and rebound characteristics. When selecting, the principle that the measured value falls within 20% to 80% of the full scale should be followed to avoid data distortion.

Practical Guide to Selecting Rotors and Speeds for Rotational Viscometers

A rotational viscometer measures viscosity by detecting the resistance encountered by a rotor rotating in the sample. When selecting a rotor, it is necessary to consider the estimated viscosity range of the sample, ensuring that the torque reading falls within 10% to 90% of the instrument's measurement range, while also taking into account the sample volume and rheological properties.

Selection of wet film thickness gauge range and accuracy requirements for comb teeth spacing.

When selecting a wet film thickness gauges, the key considerations are the measurement range and the accuracy of the comb teeth spacing. The range should cover the coating thickness with a slight margin to avoid being too small for measurement or too large, which could reduce resolution.

Selection Recommendations for Carton Compression Strength Testing Machines

When selecting a cardboard compression strength tester, the first step is to examine the core parameters, such as ensuring the force range covers the testing requirements with some margin, the accuracy is typically no less than ±1%, and the testing speed complies with standard specifications.

How to Choose a Suitable Multi-Parameter Water Quality Analyzer Based on Detection Indicators

When selecting a multi-parameter water quality analyzer, the first step is to clarify the parameters that need to be measured, such as physical, chemical, or biological indicators, because different parameters require different detection principles, measurement ranges, and accuracy levels for the instrument.

Don't be fooled by the specs! The 3 key metrics to focus on when purchasing a tensile testing machine.

When purchasing a tensile testing machine, don’t just look at the parameter sheet. Focus on three core indicators: first, the accuracy and range of the force measurement system; second, the accuracy of displacement and deformation measurements; and third, the performance of the control and data acquisition system.

An article tells you how to choose a fineness gauge.

This article introduces how to select and use a grind gauge. It is a tool for measuring particle size in coatings and inks. When selecting one, the first step is to choose the appropriate range based on the estimated fineness of the sample (commonly 0-50 µm or 0-100 µm).