Cyanide gas Detector

Cyanide gas detectors measure the concentration of hydrogen cyanide in the air using electrochemical sensors. When hydrogen cyanide reacts with the electrolyte inside the sensor, it generates an electrical current signal, which the instrument converts into a concentration reading. These devices are used in places such as electroplating plants and chemical factories to monitor the safety of the working environment and prevent personnel poisoning.
Selection
When selecting a cyanide detector, ensure the measurement range covers 0–50 ppm with a resolution of 0.1 ppm. Prioritize models equipped with audible and visual alarms and data logging functions. Note that the sensor lifespan is typically two years and requires regular calibration. For explosive environments, choose products with explosion-proof certification, and for damp conditions, opt for models with an IP65 or higher protection rating.

Terms

Standards

Instruments

Electrochemical sensor, resolution up to 0.1ppm, Response Time less than 60 seconds, with sound, light, vibration triple alarm, Protection Rating IP65, adapt to harsh environment.

$ 235.00

Using MCU chip to achieve low power consumption operation, detection error ≤ +/- 3% F. S, Response Time ≤ 30 seconds, support a variety of signal output and wireless transmission, with explosion-proof structure and remote alarm function.

$ 280.00

Using industrial grade Sensor, Response Time T90 is less than 60 seconds, resolution up to 0.1/0 ppm, with waterproof, dustproof and explosion-proof function, small and durable suitable for industrial field use.

$ 248.00

Modular design, support intelligent Sensor detection technology, with an overall explosion-proof structure, can be directly installed in dangerous areas. Standard configuration point array LCD display, sound and light alarm and a variety of signal output, support multi-gas multi-range detection and remote monitoring.

$ 590.00

Adopt MCU chip to achieve low power consumption operation, detection error ≤ +/- 3% F. S, support 4-20mA, RS485 and switch output, with explosion-proof structure and remote control operation function, Response Time ≤ 30 seconds.

$ 848.00

It can detect halogen gas leaks of less than 0.5 ounces per year, with an instantaneous Response Time and a Warm-Up Time of less than 90 seconds. It features automatic warm-up and battery protection, and a portable design weighing only 480 grams.

$ 154.00

Detect NH3 gas, range 0~ 100ppm, resolution 0.1ppm, Response Time T90 ≤ 120s, support sound and light alarm, Operating temperature -10~ 50 ℃, Working time for more than 60 hours, Portable design weighs only 170 grams.

$ 328.00

Using electrochemistry gas Sensor, Response speed, Measurement accuracy. Support 4-20mA, RS485 and other signal output, with overvoltage, lightning protection, short circuit and other multiple circuit protection functions, remote monitoring and data query.

$ 751.00

Using 8-bit micro control technology, Response Time is less than 60 seconds, equipped with 12864 point array LCD display gas concentration, with sound, light and vibration triple Alarm mode, Protection Rating up to IP65.

$ 235.00

Imported Electrochemical sensor, detection accuracy ≤ +/- 1%, Response Time ≤ 20 seconds; Support 1-5 kinds of gas detection at the same time, built-in powerful air pump, with Data storage and Temperature Humidity detection function.

$ 716.00

Maximum 4 kinds of gas simultaneous detection, integrated temperature and Humidity compensation, with Internet of Things remote monitoring function, Response Time T90 ≤ national standard, Protection Rating IP66, suitable for a variety of Installation methods.

$ 693.00

Using 32-bit microprocessor and 24-bit ADC chip, support 1-6 Sensor expansion, with 4-20mA, RS485 and relay output, Protection Rating IP65, suitable for gas monitoring in harsh environments.

$ 451.00

Electrochemical sensor, detecting phosphating hydrogen gas, range 0-20ppm, resolution 0.1ppm, with sound, light, vibration triple alarm, IP65 Protection Rating, suitable for harsh environments.

$ 235.00

Industrial Sensor, Response Time less than 30 seconds, accuracy +/- 3% FS, with explosion-proof structure, support 4-20mA and RS485 output, suitable for a variety of Gas detection.

$ 251.00

Using industrial grade Sensor to detect nitrogen dioxide gas, range 0~ 20ppm, resolution 0.1ppm, Response Time T90 < 60s, with waterproof, dustproof and explosion-proof characteristics, small and durable.

$ 248.00

Articles