Equipped with a heated vacuum bed, the temperature can reach 100 ° C, the coating speed range is 0.1~ 500mm/s, Travel 415mm, supports a variety of film tools, and the intelligent interface simplifies the operation.
Equipped with perforated heated vacuum bed, the temperature can be increased to 100 ° C, the coating speed range is 0.1-500 mm/s, and the bar and Blade Coating methods are supported to ensure uniform film thickness and sample repeatability.
Adopting chip tray direct temperature control technology, the heat exchange speed is 1-3 seconds, the speed range is 100-3000 rpm, the acceleration is 100-3000 rpm, and it has 5-stage speed adjustment and 12 sets of parameter memory functions, suitable for a variety of process requirements.
The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
The application width can be adjusted freely, and the drawdown blade Coater can be adapted to meet different experimental testing needs and realize flexible film operation.
The application width is adjustable from 100-400mm, the thickness range is 0.005-3mm, the rubber roller is heated to 200 ° C, and the drying temperature reaches 200 ° C to realize the continuous roll-to-roll film.
Application width 500mm, wet film thickness 0.005-3mm adjustable, using servo drive and PLC control, with automatic tension and correction function, suitable for a variety of coils and Coating types.
Spreader accuracy up to +/- 0.003mm, Spreader Film thickness 0.2-10 mm, rate 2-180mm/s stepless adjustable, heating temperature to 150 ℃, support a variety of accessories customization to ensure uniform and stable Spreader.
Support bar and Drawdown blade two coating methods, suitable for high, medium and low viscosity materials. Heating temperature up to 180 ° C, Vacuum chuck area, high film accuracy, adjustable speed, easy to operate and clean.
Using scraping method to achieve 0.005-3mm wet film thickness, Spreader accuracy of +/- 5%, equipped with hot air circulation Oven and automatic constant tension control to ensure Spreader uniformity and Stability.
The four-sided design allows for the preparation of film thicknesses of 200μm, 400μm, 600μm, and 800μm. Made of stainless steel, it offers high coating precision, a compact size, and is suitable for various substrates and coatings with different pH levels.
Using roll-to-roll continuous solution pool mode, the width of the substrate is 200mm, and it is dried by 130 ° C hot air Oven; the solution pool can be lifted and heated, and PLC control ensures stable operation, which is suitable for a variety of substrate processing.
Temperature control accuracy +/- 0.3 ℃, resolution 0.1 ℃, mirror stainless steel liner for easy cleaning, silicone sealing ring to ensure high sealing, microcomputer controller provides stable and reliable operation.
Adopt drawdown Bar & blade double coating method, Spreader accuracy up to +/- 0.001mm, equipped with servo motor and heating Vacuum chuck function, stable operation and Temperature Uniformity +/- 1 ℃, effective coating area 1200 × 500mm.
Microcomputer controller to achieve 0.1 ℃ resolution temperature control, mirror stainless steel liner easy to clean, equipped with silicone sealing ring to ensure the high sealing of the studio, over-temperature alarm function to improve the use of safety.
