Using D/8 structure to fit the human eye observation, built-in High Accuracy Light spectrum Sensor captures 400-700nm wavelength rays of light, quickly converts the light signal into accurate digital color information.
The stainless steel material is durable, the range is 10~ 100μm Division 10μm, the unilateral design is convenient for vertical pressing into the wet-film measurement, and the number of teeth 10 can accurately read the thickness value between the infiltrated and uninfiltrated teeth.
Measurement accuracy of +/- 1, resolution 0.1, support USB and Bluetooth data output, using Photocell, photovoltaic cell technology for reflectance detection, suitable for a variety of material surface analysis.
Smooth matte surface does not contain plasticizer, reflectance < 4%, thickness 0.25 +/- 0.02mm, to ensure test data Repeatability and comparability, in line with national standards.
Made of stainless steel, durable and repeatability; range 20~ 200μm, Division 20μm, step number of teeth 10, unilateral design is convenient for vertical pressing into wet-film measurement, in line with international standards.
With 45/0 reflectance and hiding power test function, repeability 0.2%, repRoducibility 0.5%, automatic calibration and correction of black and white board values, support USB data transmission and statistical mode.
Measurement accuracy of 0.01mm, measurement pressure of 20 +/- 0.5kpa, can maintain good parallelism, suitable for film thickness test below 20mm.
Made of high-quality non-fluorescent paper, does not contain Fluorescent Whitening Agent, black reflectance < 1, white reflectance 80 +/- 2, Laminating design enhances anti-Curl ability, test area of 0.1 square Meters.
In line with ISO2808-1974 standard, the range is 0~ 150μm, the accuracy is not more than 5μm, can measure the wet film thickness and estimate dry-film thickness, suitable for laboratory and pRoduction control.
Using one-piece casting process, strong and not easy to deform, maintaining test parallelism; Measurement range 0~ 4mm, resolution 0.01mm, contact pressure 100 +/- 10kPa, contact area 2 +/- 0.05cm ², in line with standard requirements.
Black part reflectance less than 1, white part reflectance 80 +/- 2, no Laminating design to enhance paint wettability, avoid checking or cissing, suitable for specific spreading rate brushing tests.
Simultaneous measurement of UV radiation intensity and barrier rate, Light spectrum Response 260-380nm, power range 0-40000uW/cm ², automatic conversion barrier rate and direct display, Portable design is easy to use.
Using non-fluorescent paper substrate, white reflectance 80 +/- 2, black reflectance < 1, Laminating design enhances Curl resistance, 0.1 square Meter standard area is suitable for spreading rate testing.
In line with ISO2808 standard, the range is 0~ 500μm, the accuracy is not more than 5μm, can measure the wet film thickness and estimate dry-film thickness, suitable for laboratory and pRoduction site.
Measurement range 0-6mm, accuracy of 0.01mm, contact pressure 100 +/- 5kpa, with digital display function and stable parallelism measurement, suitable for a variety of materials Film thickness detection.
