Heavy-duty stainless steel structure ensures stable support, equipped with 3 strong magnets for firm adsorption, maintaining the vertical state of Microscope, suitable for various metal surface fixing needs.
Equipped with 7-inch Touchscreen, easy to operate, support stepless speed measurement and viscosity automatic conversion, measurement range 1~ 75000000mPa.s, gigabit network port to ensure fast and reliable data transmission.
Using 15.8mm diaMeter steel bar and 9.1kg/10kg weight, the Impact height is adjustable at 610mm or 1000mm, and the battery deformation and safety risk are evaluated by simulating the impact of heavy objects.
Impact height of 1250mm, support 300g and 1000g drop weight mass, equipped with Φ 12.7mm and Φ 15.9mm punch, can pass/fail and grading test, suitable for a variety of material testing.
As an Optional accessory of air Compressor, it can effectively separate oil and water, improve compressed air mass, and is suitable for industrial environments that require gas purity.
Impact height 0-100cm adjustable, Graduation 1cm; equipped with a variety of hammer mass such as 1000g and punch diaMeter such as Φ 12.7mm, support accurate deformation testing, suitable for coating impact resistance evaluation.
The shear rate is 5.0N, the sample volume is only 170μL, the applicable viscosity range is 50~ 100000mPa · s, suitable for a variety of fluid measurement, high measurement accuracy.
Adopt oil pump forced oil inlet device, can operate continuously under 1.33 × 10 ³ Pa intake pressure, gas distribution ballast to prevent pump oil mixing, pumping speed 2L/S, Ultimate vacuum degree up to 0.006mbar, support a variety of interface conversion.
Pure oil-free design, displacement 116L/min, exhaust pressure 8bar, automatic start and stop, low energy consumption, high gas cleanliness, simple operation and convenient maintenance.
Using 2000g heavy hammer and 16mm punch, Impact depth 2.5mm, no secondary rebound phenomenon, to ensure accurate and reliable test results.
Equipped with 7-inch Touchscreen operation interface, supports high-speed data transmission of gigabit network port, measurement accuracy of +/- 2%, temperature control accuracy +/- 0.1 ℃, with automatic lifting and anti-static design.
Colorimetric integrated tube design, no liquid transfer, measurement error ≤ +/- 5%, Repeatability ≤ +/- 5%, support more than 10 measurements to take the average, built-in 30,000 data storage and thermal printer.
The pure oil-free design ensures that the gas has no oil molecules, the noise is as low as 59dB, the lame plating in the gas storage Tank is rust-proof, the service life is more than 15,000 hours, the exhaust pressure is adjustable from 5 to 8 Bar, and the automatic pressure switch controls start and stop.
The shear rate is 13.3N, the sample volume is only 67 μL, the applicable viscosity range is 20~ 37500mPa · s, and the accuracy is +/- 2% F. S, which is suitable for a variety of fluid tests.
Noise is as low as 54 decibels at work, displacement is 155 liters per minute, pure oil-free piston system ensures clean gas, Nano coating cylinder liner enhances durability, automatic start-stop saves energy and saves electricity.
