Double pointer design for easy reading, Pin Travel 0~ 2.5mm, Measurement range 0~ 100HD, error +/- 1HD, lightweight and portable only 0.16kg, suitable for on-site Hardness detection.
With tracking pointer and peak pointer double pointer design, pressing needle Travel 0-2.5 mm, Measurement range 10-90Hc, suitable for material testing with pressure above 0.049MPa when the compression rate is 50%, and can be matched with test bracket to improve Stability.
Film thickness 0.1-15 mm, output high voltage 0.8-30 KV stepless adjustable, using integrated high voltage generator to overcome static electricity, sound and light alarm function is suitable for different coating mass detection.
Adopt low noise fan and air duct to form hot air circulation system, Temperature range RT + 5~ 300 ℃, Temperature Fluctuation +/- 2%, Inner Chamber dimensions 1000 × 800 × 800mm, shelf height and quantity can be adjusted, equipped with double-decked tempered Glass observation window.
Pin Travel 0~ 2.5mm, Measurement range 0~ 100HA, Error +/- 1HA, Dual pointer design can display real-time and peak Hardness value at the same time, easy to use handheld or rack.
Conductivity Detector measurement principle, measurement range 0-80%, resolution 0.1%, Response Time 1 second, with temperature and humidity compensation and backlight display, easy to quickly detect on site.
Double pointer design with peak holding and continuous load indication function, external tolerance indicator to facilitate force value judgment, Maximum Measured value 10KN, suitable for electromagnetic interference occasions.
Dual pointer design with peak holding and continuous load indication function, Maximum Measured value 20KN, with external tolerance indicator to facilitate force value judgment, suitable for electromagnetic interference environment.
Double pointer design to achieve peak holding and continuous load indication, external tolerance indicator to facilitate force value judgment, Maximum Measured value 200KN, Indication Error +/- 2% FS, suitable for electromagnetic interference environment.
With dual pointer design can display peak and continuous load at the same time, external tolerance indicator is easy to judge the force value, the maximum Measured value is 100KN, Indication Error +/- 2% FS, suitable for electromagnetic interference environment.
Conductivity Detector cell constant K = 0.1, built-in temperature sensor real-time sensing sample temperature, suitable for low Conductivity Detector liquid measurement.
Temperature range RT + 5~ 300 ℃, Temperature Fluctuation +/- 1%, hot air circulation system consists of low noise fan and air duct, the height and number of shelves in the studio can be adjusted, double-decked tempered Glass observation window is convenient for observing samples.
Temperature range RT + 5~ 300 ℃, Temperature Fluctuation +/- 1%, equipped with hot air circulation system and double-decked tempered Glass observation window, adjustable number of studio shelves height, support independent temperature control.
Temperature range RT + 5~ 300 ℃, Temperature Accuracy +/- 1 ℃, equipped with hot air circulation system and independent temperature controller, adjustable height of studio shelf, double-decked tempered Glass observation window for easy observation.
Suitable for low and medium Hardness material measurement, pressure needle end pressure 0.55N-8.06N, pressure needle stroke 0-2.5 mm, can be matched with test rack to reduce manual operation error, improve test accuracy and Repeatability.
