Using electric pressure system and circular pressing operation mode, printing pressure 0-4mm, speed 0-100 Meters, adjustable scraper pressure and speed, support low accuracy overprinting and Color detection.
Using irreversible discoloration technology, white turns black after overheating while displaying numbers, Measuring temperature 75 ° C, circular patch design is easy to observe temperature changes.
The adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel ≥ 80mm. The integrity of the paint film was evaluated by seven grades, and the operation was simple and conformed to the GB/T1720 standard.
Pressure sensitive adhesive paste firmly, 65 ℃ single point temperature measurement accuracy, irreversible discoloration characteristics can permanently record the overtemperature state, circular design for easy observation, 2x2cm specification suitable for small space installation.
Synchronized processing of 12-bit samples, temperature control accuracy of +/- 1 ℃, circular water Bath heating and independent air path adjustment. Each air needle channel can be switched on and off separately, 316 stainless steel material is corrosion resistant, suitable for a variety of testtube specifications, supports timing and over-temperature alarm functions.
The circular stainless steel liner is used to prevent condensation and dripping, the copper tube bell mouth is designed with good air tightness and low water consumption, and the special high temperature foaming material improves the pressure life. It is equipped with a 16L large-capacity water Tank and an automatic water replenishment system.
The four-pin design is equipped with four sizes of scribing needles, which can automatically draw a circular track with a diaMeter of 100mm, support three cycle modes of 6/12/24 hours, and the measurement error is controlled within +/- 0.5%.
Adopt the circular roller scratch method to evaluate the adhesion grade, describe the adjustable diaMeter of 0-10.5 mm, equipped with four weights to achieve 200-1000g loading, table Travel ≥ 80mm, manual operation is stable and reliable.
Using irreversible discoloration technology, temperature accuracy up to 120 ℃, circular 2x2cm size with Pressure sensitive adhesive firmly pasted, surface protective film to enhance durability, suitable for harsh Ambient Temperature Monitoring.
The circular track is used to automatically record the film drying process continuously, equipped with 4 kinds of specifications to choose from, the track diaMeter is 100mm, and the measurement error is +/- 0.5%, which can intuitively analyze the stages in drying state.
Driven by compressed air, torque up to 80N.cm, start-up capacity with load, explosion-proof and spark-free design, safe operation from the environment, standard pressure Gauge and multi-specification Impeller optional.
Air motor safety explosion-proof, torque up to 80N.cm can start with load, equipped with pressure Gauge and adjustable fixed clip, a variety of Impeller adapt to different viscosity media.
Driven by compressed gas, torque up to 80N.cm can be started with load, explosion-proof and spark-free design to ensure safe operation, standard pressure Gauge and self-locking chuck, support a variety of Impeller to adapt to different viscosity media.
Driven by compressed air, torque up to 80N.cm can be started with load, with explosion-proof and no spark characteristics, standard pressure Gauge and self-locking chuck, support a variety of specifications Impeller adapt to different viscosity liquids.
Driven by compressed air, torque up to 80N.cm, Rotation speed 3000rpm, can start with load. Explosion-proof spark-free design, standard pressure Gauge, a variety of Impeller adaptable to different viscosity liquids, suitable for high temperature or flammable environment.
