Temperature range from room temperature to 60 ℃, temperature control accuracy +/- 1 ℃. Equipped with air purification device and exhaust gas treatment system to prevent cross-contamination and meet environmental standards.
The centrifugal fan with low energy consumption and reasonable air duct design is used to achieve uniform and stable airflow; the average wind speed is 0.25 to 0.45m/s, and the noise is less than or equal to 62dB (A); it is equipped with initial effect and effective Filter to meet the requirements of purification level.
The eight-stage deep purification system ensures that the water quality is pure, the resistivity of the pRoduced water is 18.25MΩ .cm, and it is equipped with an intelligent Control system to realize automatic monitoring and a variety of water intake modes to meet the strict experimental requirements.
The water pRoduction rate reaches 5L/h, the eight-stage purification system includes reverse osmosis (RO) membrane and ultra-pure polishing column, the desalination and sterilization rate is over 99%, supports intelligent control and a variety of water intake modes, suitable for laboratory environment use.
Air disturbance technology is used to simulate indoor air flow, equipped with 24 independent sample Chambers to prevent cross-contamination, the drying Temperature range is adjustable at RT-50 ° C, and the outer exhaust air is purified without affecting the environment.
The quasi-closed Glass damper prevents external air flow from penetrating, the dual-gear adjustable air volume system maintains the wind speed of 0.3~ 0.6m/s, the 304 stainless steel countertop is resistant to corrosion and easy to clean, and the purification efficiency reaches 100 levels.
Application width 300mm, Spreader accuracy +/- 0.005mm, Drawdown blade can be quickly disassembled and cleaned, three independent temperature control oven to ensure uniform drying, suitable for a variety of substrates and Stock processing.
Using dip coating process with double roll extrusion residual material, Spreader thickness adjustable, mechanical speed 0.1-1 m/min, Oven temperature 50-150 ℃ +/- 3 ℃, suitable for a variety of Coating Spreader.
With 24 independent temperature control studios, Temperature range RT +~ 50 ℃, air disturbance technology and three-stage purification system are used to avoid cross-contamination of samples and improve drying efficiency.
Quasi-closed Glass damper to prevent external air penetration, 304 stainless steel integrated seamless connection corrosion resistance easy to clean, average wind speed 0.3~ 0.6m/s, clean level of 100, noise ≤ 62dB (A).
Quasi-closed Glass damper to prevent airflow penetration, dual-gear adjustable air volume system to maintain 0.3~ 0.6m/s wind speed, 304 stainless steel countertop corrosion resistance easy to clean, noise ≤ 62dB (A).
Equipped with 8 Meters Oven, roller heating temperature up to 200 ℃, effective application width 500mm, Spreader thickness range 0.005-3mm, support automatic unwinding to winding process, suitable for hot-melt adhesive film.
Filtrate efficiency ≥ 99.97% For particles ≥ 0.5μm, the average wind speed is adjustable from 1.2 to 2m/s, the trend purification level is up to 1000, the work surface can reach 10,000, equipped with mobile runner and adjustable jack, flexible to adapt to changing working positions.
Support 0-3000um Coating thickness adjustment, travel speed 0-5m/min, Oven temperature 40-150 ℃; Modular head can switch extrusion, Drawdown blade and other Spreader functions, integrated tension closed-loop control and infrared drying options.
Vertical manifold with quasi-closed Glass damper, adjustable wind speed range 0.3~ 0.6m/s, compact design for easy placement, equipped with remote infrared control function.
