Range 320~ 320000000mPa · s, support 0.1~ 200rpm stepless speed change, LCD screen can simultaneously display viscosity, shear rate, shear stress and other sets of paraMeters, with a small number of sample adapters only 10-20mL sample volume.
Using 16-bit microcomputer processor and stepper motor high subdivision drive, the whole process of stepless variable speed and stable Rotation speed, Measurement accuracy of +/- 1% F. S, LCD screen can display viscosity, shear rate, shear stress, Rotation speed, temperature and torque and other paraMeters.
Driven by a 16-bit microcomputer processor and a stepper motor, the range is 60 to 60,000,000 mPa · s, and the whole process is continuously variable. The LCD screen displays paraMeters such as viscosity, shear rate, and shear stress.
Stepper motor direct drive to ensure accurate Rotation speed, Measurement accuracy of +/- 1% F. S, repRoducibility +/- 0.5% F. S, LCD with backlight display information, can display the maximum viscosity value and exceed the limit alarm.
Range 0~ 100000 mPa · s, repRoducibility +/- 1% F. S, LCD screen can display paraMeters such as viscosity, shear rate, shear stress, Rotation speed, temperature, percentile torque, rotor number and the maximum viscosity value of the selected rotor at the current Rotation speed.
Using the principle of polarized light interference, equipped with a 560nm full-wave plate, the light diaMeter of the Analyzer is 150mm, which can quickly and continuously analyze the internal stress of transparent materials and support qualitative or semi-Basis Weight measurement.
Using the principle of polarized light interference, equipped with 560nm full-wave plate, determinable or semi-Basis Weight measurement of internal stress, the aperture of the polarizer is 150mm, which supports continuous and rapid analysis of transparent materials.
Based on the principle of flow between parallel plates, it can quickly and accurately measure inks spread under low shear stress. The sample volume is 0.5 +/- 0.003 cubic centiMeters, and the maximum measurement range of the plate is 9cm. It is suitable for inks flowability evaluation.
Small hydraulic device to achieve masonry shear test, rated thrust 150KN, digital pressure Gauge direct reading, accuracy +/- 1%, detection of local damage, easy to operate.
High Accuracy Observation and Analysis of Birefringent Substances with Stress-free Flat Field Objectives and Large Field Eyepieces, Fretting Grid of 2 μ m, Rotating Stage and Transmission Reflection Illumination.
Optical inspection system with infinite distance, long working distance flat-field objective with non-stress, fretting grid value of 2 μ m, 360 ° adjustable rotating stage, support polarization observation and microphotography.
With transparent reflection lighting switching function, configure center adjustable non-stress objective lens and rotating stage, fretting grid value 2 μ m, table vertical Travel 30mm, support orthogonal and cone light observation.
Rotation speed control with 200 stops and 0.1-200 rpm range, support shear stress and shear rate measurement, can store 10 programs and have data recording function, Measurement accuracy of +/- 1% F.S.
The rotational speed range is 200-11000rpm, the processing capacity is up to 40L, and the precision-matched stator structure is used to achieve high-efficiency shear emulsification, which is suitable for the dispersion of various viscosity liquids and granular materials.
The adapter uses a stainless steel sample container for removable cleaning, the sample volume is only 16 ml, the Temperature range covers -40~ 300 ℃, the temperature accuracy is +/- 0.1 ℃, and supports accurate viscosity measurement and shear analysis.
