The device can precisely control the film thickness of the ink layer of the color strip, and the ink injection amount is 0.0012g, which is used for ink contrast and color concentration detection.
The mechanical compression spring device is not easy to damage, the accuracy is up to 0.5HW, the film thickness 0.4-6 mm workpiece can be detected, and various Hardness values such as Brinell Rockwell can be obtained through the conversion table.
The minimum measurable inner diaMeter is 10mm, the maximum sample thickness is 6mm, and the imported special steel crimp and high-strength pointer components are used. It has good Stability and portability and supports Hardness value conversion.
Using smooth steel bar design, no winding steel wire or pressurized groove, film thickness is 0μm, diaMeter 6.35mm, total length 400mm, suitable for machine control film thickness.
Smooth steel bar design, no wire-wound, wet film thickness 0 μ m, diaMeter 12.7mm, total length 400mm, suitable for machine Spreader regulation, to ensure uniform and accurate film.
Adopt magnetic Induction principle to measure 0-1250μm thickness, equipped with line Probe measurement groove and narrow area, support single point and two point calibrating, with automatic matrix recognition and undervoltage prompt function.
Roller type design, range 0~ 500μm, stainless steel material to ensure durability, suitable for on-site rapid measurement wet film thickness, in line with a number of execution standards.
Made of stainless steel, the thickness is only 1.5mm, the range is 20~ 200μm, Division 20μm, the card design is convenient for quick measurement of wet-film Coating thickness on site.
Using precision drawing stainless steel wire winding structure, wet film thickness 40μm, application width 220mm, Coating thickness is precisely controlled through the groove to achieve uniform repeability Spreader effect.
304 stainless steel material, wet film thickness of 200 μ m, Spreader width of 250mm, formed pRoduction process to ensure uniform film, suitable for precision experimental needs.
Spreader offers 217.2 micron wet film thickness with formed process and stainless steel to ensure uniformity and long-term durability for thicker film needs.
Wire-wound design, wet film thickness 118.9μm, diaMeter 9.5mm, stainless steel material, wear resistance and corrosion resistance, suitable for preparing specific film thickness wet-film.
Wet film thickness 160 microns, 303 austenitic stainless steel material corrosion resistance, suitable for high viscosity test is not easy to block, longer service life.
Coating thickness is controlled by wire-wound process, wet film thickness reaches 100μm, application width 365mm, uniform groove is formed by precision stainless steel wire winding to achieve accurate Spreader.
The stainless steel material ensures durability, the film thickness range is 450~ 675 μm, and the groove difference is 25 μm, which is convenient for accurate determination of Coating sag on site.
