Observation angle 0.2 °~ 2.0 ° continuously adjustable, incident angle -40 °~ + 40 ° adjustable, using silicon diode Detector and lithium battery power supply, support continuous work for more than 30 hours, suitable for indoor and outdoor measurement.
Provide reference and working standard types, covering signs, markings and raised road signs, with a minimum effective reflective area of 50mm * 50mm, to meet a variety of Color and structural classification requirements.
The 2850mm sand guide tube and 850μm filtrate net are used to control the falling sand, the calibration funnel can adjust the uniformity of the sand volume, and the sample holder can freely adjust the height and horizontal direction to ensure the Test accuracy and Reliability.
With 0.2 °~ 2.0 ° continuously adjustable observation angle and a variety of incident angle settings, Measurement range 0~ 1999 mcd • lx-1, using silicon diode Detector and standard A Illuminant, to ensure Measurement accuracy consistent with international standards.
Measurement time only 1.5 seconds, chromatic value Repeatability Delta E * ab within 0.04, support polygon tolerance master standard determination, can customize the color gamut range to meet special detection needs.
The instrument's observation angle is continuously adjustable from 0.2 ° to 2.0 °, the incident angle covers +/- 0 ° to +/- 20 °, and the Measurement range is 0~ 3000 mcd • lx-1. It uses silicon diode Detectors and standard A Illuminants to ensure measurement accuracy.
The radius of the device Impact hammer is 6.4mm, the total mass is 190 +/- 2g, the structure is reasonable, the operation is simple, the applicability is wide, the Measurement accuracy is high and safe, and it meets the requirements of GB/T24725-2009 standard.
