Fast measurement using laser light scattering principle, with online automatic mechanical Adjustment, Measurement range 0.01-100 mg/m ³, built-in optical path self-cleaning system to avoid pollution, support a variety of cutters and sampling modes.
The laser light scattering principle to achieve rapid measurement, detection sensitivity of 0.001mg/m ³, with online automatic mechanical Adjustment, built-in optical path self-cleaning system to avoid contamination of core components, support a variety of cutter selection.
Using 32-bit microprocessor and 24-bit ADC chip, equipped with 2.4-inch high definition display, supports 1-6 Sensor configurations, with 4-20mA, RS485 and other signal output, Protection Rating up to IP65, Response Time ≤ 20 seconds.
Micro vibration technology implementation of real-time online measurement, range 0~ 50~ 100mpa.s, accuracy +/- 0.5%, Response Time 2 seconds, suitable for a variety of fluid media.
Micro vibration technology implementation of real-time online measurement, range coverage of 0-5~ 50-5000pa.s, accuracy of +/- 0.5%, temperature 500 ℃ and Response Time only 2 seconds, suitable for high temperature and high voltage conditions.
Glass shell enhances corrosion resistance, simplifies operation without reference solution, Measurement range 0-200.0mS/cm, Suitable for High Accuracy conductivity detection of corrosion media, supports online monitoring and laboratory applications.
Imported High Accuracy Electrochemical sensor, detection limit up to 0.001ppm. Support 4-20mA, RS485 and other signal output, with overvoltage, lightning protection, short circuit and other multiple protection and automatic recovery functions.
Adopt pre-treatment technology, adapt to high temperature, humidity and dust environment, equipped with 7-inch Touchscreen real-time display concentration Linear dispersion, detection error ≤ +/- 3% F.S, support 4-20mA and RS485 output, can realize automatic drainage and zero emission cycle function.
Air disturbance technology is used to simulate indoor air flow, equipped with 24 independent sample Chambers to prevent cross-contamination, the drying Temperature range is adjustable at RT-50 ° C, and the outer exhaust air is purified without affecting the environment.
Platinum Sensor provides linearly stable measurement results, Conductivity Detector cell constant K = 10, Measurement range 0 to 200mS/cm, suitable for high Conductivity Detector liquid detection.
Conductivity Detector cell constant K = 0.1, built-in temperature sensor real-time sensing sample temperature, suitable for low Conductivity Detector liquid measurement.
Using polarographic analysis technology and imported film head, the accuracy reaches +/- 1% FS, with PH and temperature automatic compensation function, supports Multi-ParaMeter simultaneous display and Internet of Things communication, Protection Rating IP65, to ensure long-term stable operation.
With 24 independent temperature control studios, Temperature range RT +~ 50 ℃, air disturbance technology and three-stage purification system are used to avoid cross-contamination of samples and improve drying efficiency.
Modular design with low power consumption, intelligent Sensor detection technology, Explosion-proof level Ex db IIC T6 Gb, Protection Rating IP66, support 4-20mA, RS485 and switching signal output, Response Time ≤ 30S, suitable for a variety of industrial environments.
Using 32-bit microprocessor and 24-bit ADC chip, support 1-6 Sensor expansion, with 4-20mA, RS485 and relay output, Protection Rating IP65, suitable for gas monitoring in harsh environments.
