Digital Temperature Logger

The digital temperature recorder converts physical temperature into electrical signals through a temperature sensor, processes it via circuitry, and directly displays the numerical value on the screen. This instrument is used for continuous monitoring and storing data on temperature changes in environments or objects, making it suitable for applications requiring temperature monitoring, such as warehousing, transportation, and food processing.
Selection
When selecting a digital temperature recorder, it is essential to clarify the measurement range and accuracy requirements, consider the compatibility between the sensor type and the measured medium, check the data storage capacity and export methods, verify that the protection rating is suitable for the usage environment, confirm the battery life and calibration cycle, and evaluate whether the user interface aligns with operational habits.

Terms

Standards

Instruments

Bluetooth wireless technology supports a transmission distance of about 30.5 Meters, making it easy to set up and download data in hard-to-reach locations. With +/- 0.2 ℃ High Accuracy and weatherproof enclosure, it can work stably in a wide temperature range of -40~ 70 ℃. Data storage capacity is 84650 Measured values.

$ 443.00

With +/- 0.2 ℃ High Accuracy, Support Bluetooth Wireless Setup and Data Download, Protection Rating up to IP67/NEMA6, Stable operation in harsh outdoor environments of -40~ 70 ℃.

$ 288.00

With 56 channel temperature acquisition capability, 24-bit high-speed AD measurement chip to ensure accuracy, channel isolation voltage up to 350V to enhance anti-interference, built-in 8G memory supports up to 97 days of continuous recording, Modular design supports up to 64 channel expansion.

$ 1141.00

Programmable recording intervals from 1 minute to 24 hours, Storage capacity up to 8000 readings, built-in temperature sensor, IP65 Protection Rating, compact and portable weighing only 29.4 grams.

$ 319.00

Using 32-bit high-speed MCU and 24-bit high-speed AD measurement chip, Response speed is fast and high accuracy, support 32-channel independent setting, channel isolation voltage up to 350V, built-in 8G memory can record continuously for 97 days.

$ 818.00

Equipped with 32-bit high-speed MCU and 24-bit AD chip, Measurement accuracy up to 0.2 ℃ + 2 words, support 56-channel independent setting alarm and error correction, built-in 8G memory can record continuously for 97 days, and the isolation voltage between channels is as high as 350V.

$ 1191.00

Using 32-bit high-speed MCU and 24-bit AD chip, it supports 16-channel independent setting, AC/DC 350V between channels, built-in 8G memory can record continuously for 97 days, and has multi-interface display and sound and light alarm functions.

$ 570.00

Using microcomputer intelligent PID digital display temperature control, temperature control accuracy +/- 1 ℃, equipped with hot air circulation system to ensure uniform temperature, indoor shelf height and quantity adjustable, easy access to different specifications of samples.

$ 288.00

Quadruple Synchronous Stir Design, Temperature range RT +~ 100 ℃, using digital electronic temperature control technology, heating power 150W * 2, stirring speed 0~ 2000rpm, DC motor running without noise vibration.

$ 243.00

Temperature range RT + 10~ 300 ℃, Temperature Fluctuation +/- 1 ℃, equipped with stainless steel liner and intelligent digital temperature control instrument to ensure temperature Stability and durability.

$ 393.00

With temperature and rotational speed dual digital display function, temperature control accuracy of +/- 1 ℃, using PID self-tuning and thyristor control, Max. stirring Capacity 2000mL, heating power 500W, Pottery and porcelain coated panels are resistant to corrosion and high temperature.

$ 667.00

Temperature control accuracy of +/- 1 ℃, Temperature range RT +~ 299 ℃, stainless steel studio water Tank, excellent corrosion resistance, digital display automatic temperature control, easy and reliable operation.

$ 414.00

With +/- 0.21 ° C temperature accuracy and +/- 2.5% Humidity accuracy, built-in mass storage and LCD display, support for multiple recording modes and user replaceable Sensor.

$ 369.00

Microcomputer intelligent PID digital display temperature control, temperature Accuracy +/- 1 ℃, equipped with hot air circulation system and double-decked tempered Glass observation window, studio shelf height can be adjusted, support independent temperature control function.

$ 327.00

The digital display temperature control is accurate and reliable, the hot air circulation system is composed of a high temperature fan and a suitable air duct to improve the Temperature uniformity in the working room, and the heating wire is installed at the bottom to heat up quickly.

$ 2171.00

Articles

Application of Laboratory Scraper Heating Coating Machine in Hot Melt Adhesive Coating
This article introduces the application of a laboratory blade heating coating machine in hot melt adhesive coating. It first explains the coating process and principles, including three stages—heat conduction, fluid shear, and surface wetting—as well as the influence of temperature on adhesive viscosity.
Application of High-Temperature Viscometer in Testing the Melt Viscosity Characteristics of Hot Melt Ink
This article introduces a method for testing the melt viscosity of hot-melt ink using a high-temperature viscometer. The test employs a rotational viscometer to measure the viscosity of three ink samples at different temperatures.
Determination of Thermal Decomposition Temperature and Inorganic Filler Content in Ink by Thermogravimetric Analyzer
This article introduces how to determine the thermal decomposition temperature and inorganic filler content of ink using a thermogravimetric analyzer. During the test, a small amount of ink sample is heated in a nitrogen or air atmosphere, and the mass change curve is recorded.
Rapid temperature change high and low temperature test chamber for thermal fatigue evaluation of PCB board solder joints.
This paper discusses the application of rapid temperature change high and low temperature test chambers in evaluating the thermal fatigue of PCB board solder joints. Solder joint fatigue is primarily caused by differences in material thermal expansion, and the test chamber simulates thermal stress through temperature cycling to accelerate the fatigue process.
Application of Three-Chamber High and Low Temperature Test Chambers in Rapid Temperature Cycling for Electronic Products
The three-chamber high-low temperature test chamber is used for reliability testing of electronic products, enabling rapid temperature transitions through independent high temperature, low temperature, and test zones. Compared to traditional single-chamber equipment, it reduces temperature change time and enhances testing efficiency.
Temperature Oscillation Suppression in Reflux Synthesis Using Laboratory Stirring Heating Mantles
This article explores the causes and suppression methods of temperature oscillations in laboratory heating mantles during reflux synthesis.
Application of Transparent Constant Temperature Water Bath in Visualization of Material Thermal Deformation
The constant temperature water bath provides a stable environment for observing the deformation of materials after heating by maintaining a constant and uniform temperature of the liquid medium.
The impact of temperature uniformity in laboratory water baths on viscosity measurement
This article discusses the importance of temperature uniformity in laboratory water baths for viscosity measurement. Viscosity is highly sensitive to temperature variations, and uneven temperature distribution within the water bath can lead to deviations in measurement results.
The Impact of Cooling Circulating Water Chillers on the Temperature Stability of Digesters
The cooling circulator helps maintain a stable temperature for the digester by circulating the cooling medium, thereby improving the repeatability of experiments. Its working principle involves using a refrigeration system to lower the water temperature, and then circulating the cooled water to the digester through a circulation pump to absorb excess heat.
Guide to Selecting a Laboratory Rotational Viscometer for Coatings Development
This article introduces how to select a laboratory rotational viscometer in coatings research and development. It first explains the principle of rotational viscometers measuring viscosity based on shear resistance, and then points out that key parameters to consider during selection include measurement range, shear rate, temperature control, and rotor configuration.
High-temperature viscometer evaluates the flow characteristics of ceramic coatings before sintering.
This article introduces how to use a high-temperature viscometer to evaluate the flow characteristics of ceramic coatings before sintering. During measurement, the instrument detects changes in the viscosity of the coating sample under simulated sintering temperature conditions using rotational or oscillatory principles.
Temperature-controlled Rotational Viscometer Simulates Coating Rheology in Construction Environments
This article introduces how to use a temperature-controlled rotational viscometer to simulate construction environments in order to study the flow characteristics of coatings. The viscosity of coatings changes under different temperatures and shear conditions, which affects their application performance.
Rotation Speed of Sample Rack in Hot Air Aging Test Chamber on Color Fastness of Textiles
This article explores the influence of the rotation speed of sample racks in a hot air aging test chamber on the color fastness testing of textiles. The rotation speed affects the flow of hot air and temperature uniformity inside the chamber, thereby altering the heating conditions of the samples and leading to variations in color fastness results.
Temperature uniformity of high-temperature aging test chamber for UV resistance testing of inks
This article discusses how the temperature uniformity of high-temperature aging test chambers affects the accuracy of ink UV resistance testing. Temperature uniformity refers to the deviation in temperature at various points inside the chamber, with smaller deviations leading to more reliable test results.
Difference between Black Panel Temperature and Black Standard Temperature in Light Aging Test Chambers
In the light aging test chamber, black panel temperature and black standard temperature are two distinct temperature indicators. The black panel temperature is measured using a black metal panel sensor, reflecting the immediate heating effect on the material surface under light exposure and is significantly influenced by air convection.