With programmed vacuum cycle control, the maximum number of cycles is 99 times, and the drying time is shortened by more than 50% compared with the traditional method; equipped with a digital vacuum Gauge, the control accuracy is +/- 1% to ensure a stable vacuum environment.
Equipped with programmed vacuum cycle function, drying time is shortened by more than 50%, temperature control accuracy +/- 1 ℃, support 7 groups of 63-step Program settings, digital Vacuum Level control accuracy +/- 1%.
Adopt electric push Rod to drive Spreader movement, adjustable speed range of 2-200mm/s, temperature accuracy +/- 3 ℃, support Vacuum chuck and electric heating function, improve Spreader uniformity and operation convenience.
Vacuum heating drying technology, Vacuum Level up to -0.098MPa, pumping 80-120 liters/min, drying time is only 4-6 minutes, with intelligent PID temperature control and over-temperature alarm function, easy and safe operation.
With programmed vacuum cycle control, it can set the range of 50~ 900Pa Vacuum Level, and the drying time is shortened by more than 50%; it adopts digital vacuum Meter automatic control, accuracy +/- 1%, and supports 7 groups of 63-step temperature programming.
Vacuum environment can reduce the boiling point of liquid, suitable for drying heat sensitive substances, Vacuum Level < 133Pa, temperature control accuracy +/- 0.5 ℃, effectively shorten the drying time and prevent sample oxidation or explosion.
Cuboid Studio improves volume utilization, drying time is reduced by more than 40% compared with traditional Vacuum Chamber, Temperature range RT + 10~ 200 ℃, Vacuum Level up to 133Pa, double-decked Glass door is easy to observe.
The digital vacuum Gauge is used to automatically control the Vacuum Level, with an accuracy of +/- 1%; the heating element is located in the Shelf of the box to shorten the heating time by 50%; the special aluminum shelf conducts heat quickly and does not oxidize at high temperature, effectively improving the drying efficiency.
The cuboid studio improves the volume utilization rate, the Vacuum Level control range is 10~ 105Pa accuracy +/- 1%, the programmed vacuum cycle accelerates the drying, and the 7 groups of 63-step programmable temperature control realize the whole process control.
Double station design can process two samples at the same time, Vacuum Level up to -0.098MPa, drying time only 4-6 minutes, suitable for rapid drying of wet paper samples with a diaMeter of no more than 200mm.
The digital pressure sensor is used to automatically control the Vacuum Level, with accuracy +/- 1%; the programmed vacuum cycle can shorten the drying time by more than 50%; 7 groups of 63-step temperature programming realize the control of the rising and cooling rate, and the studio stainless steel material is durable and easy to clean.
Vacuum environment significantly reduces the boiling point of liquid, suitable for heat-sensitive substances; drying Temperature range RT + 50~ 200 ℃, Vacuum Level < 133Pa; inert conditions prevent oxide explosion, powder sample stability does not move.
The equipment adopts an electric lifting platform and variable frequency speed regulation, with a maximum Vacuum Level of -0.095Mpa to ensure efficient mixing of materials in a vacuum environment; the core component is SUS304 stainless steel, which is durable and easy to clean, and the compact design is suitable for a variety of application scenarios.
The drying time is shortened by more than 50%, the Vacuum Level range is 10~ 105Pa, the temperature control accuracy is +/- 1 ℃, and the programmed vacuum cycle and 7 groups of 63-step temperature programming are provided to support inert gas environment operation.
The digital pressure sensor is used to automatically control the Vacuum Level with accuracy +/- 1%; the programmed vacuum cycle can shorten the drying time by more than 50%; 7 groups of 63-step programmable temperature control support slope mode to achieve accurate heating and cooling rate control.
