Rotation speed 2500rpm, can handle 2000ml volume sample, integrated magnetic stirring, vortex mixing and microplate oscillation multi-function.
With point and continuous operation mode, Speed range 200-2500rpm, reinforced engineering plastics and TPU work surface, acid and alkali wear resistance, support magnetic stirring and microplate adaptation.
With PID temperature control mode, temperature uniformity up to +/- 0.5 ° C, support 0-100 hours timing and power failure automatic recovery function, double-decked heating system to ensure foster stability, suitable for a variety of microplate samples.
With magnetic stirring function, the maximum stirring capacity of 2000ml, Speed range 200-2500rpm, vibration range 4.5mm, support point and continuous operation mode switching.
Frequency of 710 vibrations per minute, mixing in 30 seconds; can handle 0.5 to 20 liters of barrel paint, equipped with safety interlock and height adjustment functions, quiet operation and easy loading.
Elliptical trajectory vertical vibration design, vibration Frequency 660 times/min, maximum load 30KG, equipped with automatic cooling down system to maintain sample temperature stability, closed structure to reduce noise and pollution risk.
Equipment Vibration Frequency 660 times/min, maximum load 30KG, elliptical trajectory movement to ensure that the sample test conditions independent equality, equipped with automatic chill down system to maintain temperature stability.
Vibration Frequency 660 times/min, maximum load 30KG, elliptical trajectory motion to ensure that the sample test conditions are independent and equal, equipped with automatic chill down system to maintain temperature stability.
Using film heating and PID intelligent temperature control technology, the temperature control accuracy is up to +/- 0.3 ° C, the temperature uniformity is less than or equal to +/- 0.5 ° C, and the automatic preheating and power failure recovery functions are supported.
The small design is only 23x20cm, the maximum centrifugal force is 500xg, and the speed is 2500rpm. It can handle 2x96 hole plates, avoid liquid leakage by vertical loading, and improve the experimental efficiency.
Using three eccentric axis equilibrate drive to ensure uniform sample oscillation, Speed range 40~ 300rpm, swing amplitude 35mm, can run continuously for a long time, Rotation speed monitoring and mild start function.
It adopts 96-hole 0.2ml design, supports 100 ℃ high temperature environment, is compatible with a variety of centrifuge tube modules, and meets the thermostatic treatment requirements of different specifications of samples.
The fastest acceleration time is less than or equal to 6 seconds, and the fastest deceleration time is less than or equal to 5 seconds. It is equipped with instantaneous centrifugal function, door cover protection, and imBalance detection system to ensure safe operation.
DC brushless motor to achieve 300~ 1350rpm Oscillation Frequency, temperature control accuracy of +/- 0.3 ℃, with power-off recovery function and 0-100 hours timing setting, to meet the long-term stable foster needs.
DC brushless motor drive, low noise and maintenance-free; Oscillation Frequency 50~ 1600rpm, soft start to avoid sample splashing; can handle 4 microplates at the same time, support RS232 interface to connect to the computer.
