Equipped with long and short pin holders and Φ 3mm and Φ 2mm pins, the pin axis is less than 1/100 after the parallelism error combination to the bottom surface, and less than 1/200 when the force is 300N, making it easy to operate without adjustment.
Equipped with constant load weights to ensure stable loading, an adjustable level workbench that is flush with the pressure foot, and a glass tabletop that is wear-resistant and rust-proof, effectively reducing human error and improving test repeatability.
With a standard 45 degree tilt angle, the same as the light box base color does not interfere with the viewing effect, Dimension 395 * 350mm, weight 1.2Kg, flexible placement and easy to disassemble and transport.
Rated load 500N, rack and pinion drive, hand pressure operation is simple and stable, large foot design to ensure smooth measurement process, Travel 75mm, suitable for Force Gauge installation for tensile or plug force test.
Suitable for medium-hardness rubber, thermoplastic elastomers, and plastics, with a measurement range greater than 90 HB and less than 20 HD, compliant with ASTM D2240 standard, and supports both handheld and benchtop usage modes.
Adopting spiral trapezoidal screw, it has the characteristics of manual operation, simple stability, vertical and lying dual-use, the maximum load is 500N, and the tensile force is Travel 200mm. It is suitable for tensile and compressive load, insertion and unplugging force, and failure test.
Using handwheel swirl/spin screw to control displacement, smooth operation and simple operation, rated load 500N, Test Travel 0~ 200mm, vertical horizontal dual-use design for easy installation and use.
Measured value 500N, suitable for sheet, block material push-pull and destructive force test, can be used with Force Gauge test stand.
Internal fixed capacity 100ml, reduced bubble effect by compression mechanism, high measurement Repeatability, equipped with desktop stand and cleaning brush, suitable for a variety of liquid density tests.
Pressure is applied to the hardness Gauge by weight, with a total mass of about 5kg and a pressing speed of 3.2mm/s to ensure test Stability and High Precision, suitable for standard specimen adjustment.
Measurement range is 0~ 100HA, resolution up to 0.1HA, measurement error ≤ +/- 1HA (20-90HA), Ambient Temperature 0~ 40 ℃, Dimension 173 * 56 * 42mm, weight 233g, support RS232 communication cable.
Equipped with special fixed load weight, the total mass is about 1kg, and the downward pressure speed is 3.2mm/s, which can improve the Stability and accuracy of rubber Hardness measurement.
Standard light sources covering 6500K to 2700K Color temperature range, support UV detection; no need to warm up and open immediately, low energy consumption without heating; Illuminant use time can be displayed, with 45 ° standard stand optional.
Using 6.44ppt high concentration calibrated liquid, Encasement alone to ensure freshness, light block Encasement anti-ultraviolet oxidation, valid period of up to 5 years, suitable for field and portable use.
800Ppm concentration accurate and stable, photoresist Encasement to prevent ultraviolet oxidation, Encasement alone for easy on-site use, valid period of up to 5 years, temperature-controlled environment to ensure Reliability of data.
