The linear velocity of blade disk is 10.5 m/s, the volume of material barrel is 1.8 L, and the aggregates are destroyed by strong impact and shearing to achieve high-efficiency dispersion and mixing, which is suitable for liquid material experiments.
Using 1400rpm speed regulation and 1.5 liters effective volume sand grinding basket, rapid dispersion and grinding are achieved through tensile shear and Impact between sand and material, and the operation is simple.
Set dispersion and sand grinding functions in one, complete two processes in a single container, speed range 130~ 3000rpm, grinding basket size Φ 80x60mm, high efficiency and easy to clean.
The variable frequency motor is used to achieve stepless speed regulation from 0 to 7500 rpm, equipped with dispersed impeller and sand grinding blades, and the dual-axis constant force lifting system has a stroke of 200mm, which can adapt to different experimental requirements and calculate the material reaction relationship.
1400 rpm high-speed stirring is used to achieve strong tensile shear and Impact between the material and the sand, and the fineness of grinding can reach 25 microns or less, suitable for sample testing, with a capacity of 1.5 liters.
1400 rpm high-speed stirring is used to achieve strong tensile shear and Impact between the material and the sand, the fineness of grinding can reach 25 microns or less, and the capacity is 1.5 liters, which is suitable for laboratory sample dispersion grinding.
Using dual-axis constant force lifting system and variable frequency motor, 0-3000rpm stepless speed regulation, equipped with dispersed impeller and sand grinding blades, can directly calculate the relationship between material viscosity and reaction rate.
Double disc independent operation can be used by double persons at the same time, the diaMeter of the throwing disc is 230mm, equipped with a polishing water supply system and a drawer-type sewage collection box, the transmission is smooth and the noise is low.
Compression stroke 2.50mm, load 237g, suitable for wet mold sand/core surface Hardness measurement, support USB and Bluetooth data output, with average calculation and undervoltage alarm function.
Rotation speed is constant with brushless DC motor, output torque is large, support 3L Max. stirring capacity. Disc heating table heat concentration, with anti-corrosion liquid guide Tank design, improve operation safety and durability.
Suitable for manual or mechanical low and medium pressure molding of fine sand core testing, compression stroke 2.50mm, load 980g, with average calculation and MAX Maximum latch function, support data output communication.
Using 1320rpm high-speed dispersion shaft, equipped with 30L grinding cylinder to achieve strong shear impact on the ground, sieve discharge design is easy to clean and change color, adapt to different material fineness adjustment.
Double disc independent operation, Rotation speed 50~ 1400rpm stepless speed regulation, throwing disc diaMeter 230mm, equipped with water supply system and drawer type sewage box, smooth transmission and low noise.
Double disc independent control can be operated by double person at the same time, the diaMeter of the throwing disc is 230mm, the Rotation speed is 900rpm, the transmission is stable and the noise is small, the operation and maintenance are convenient, and it is suitable for polishing requirements of various materials.
Double disc independent control can be used for double person operation at the same time, smooth transmission and low noise, throwing disc diaMeter 230mm, Rotation speed 650rpm or 800rpm optional, easy operation and maintenance.
