The thickness of the pressurable steel plate Aluminum Panel is 0.2~ 1.5mm, the weight of the whole machine is 50kg, and the compact shape is only 300 * 300 * 190mm, which meets the NCCA standard T-Bend test method.
Support 0.1-1 steel plate and 0.1-2 Aluminum Panel test, can complete 0T to 1T multi-stage bending, equipped with pliers pressing device and tape adhesion inspection function, to meet the standard bending test process.
The equipment can perform a 45 ° bending test, support 0.5~ 1.0mm plate thickness, equipped with Travel ≥ 10mm flattening mechanism, suitable for accurate testing of coating flexibility.
The gear pair and crank lifting mechanism are used to achieve accurate bending, the first bending angle is less than 45 °, the flattening mechanism Travel ≥ 10mm, which can test 0.5-2 mm thickness plates and support OT to T bend test.
The test bending angle is less than 45 degrees, suitable for steel plate thickness 0.5~ 1.0mm and Aluminum Panel thickness 0.5~ 2.0mm. The gear pair and crank lifting mechanism are used to achieve T-shaped bending, which is easy to operate.
With +/- 0.1% accuracy Sensor and 0.01mN resolution, it supports 1-92 ° bending angle adjustment and 0.5-50 °/sec angular speed control, with self-Adjustment and three independently adjustable test angles, suitable for 0.01-5 thickness materials.
A bending angle is less than 45 degrees, can test 0.5~ 1.0mm Film thickness sample, flattening mechanism stroke is not less than 10mm, using crank lifting mechanism to achieve T-shaped bending test.
Double-sided uniform tin plating, surface mass I, Hardness T52, standard thickness 0.28mm, provide crimping listening plate, rounded corners with or without holes and other specifications, single batch pRoduction of 10w sheets.
Equipped with 18 standard color level solutions, in line with GB/T1722 standards, using visual ratio method, suitable for Color Determination, Test Ambient Temperature 23 +/- 2 ℃, to ensure accurate and reliable results.
Measure the surface of paint film and putty film and the actual drying time, in line with GB/T1728 standard, the weight of the Tester is 200g, and the weight of the bottom area is 1cm ².
Hollow structure design, filled with lead particles to adjust weight, volume 100ml, in line with GB/T6750 standard, suitable for Coating density measurement.
Equipped with 18 standard color scale solution, prepared according to GB/T1722-92 standard, using an inner diaMeter of 10.75mm Glass testtube, Color comparison is carried out in the Color Assessment Cabinet to ensure accurate measurement results.
Bakelite material is durable, the diaMeter of the flow hole is 4mm, the capacity is 100ml, and the outflow time is 0~ 150s. It is suitable for the determination of the viscosity of paints Coatings and meets the GB/T1723 standard.
The outflow aperture is 4mm, the outflow time is 0~ 150s, and the measuring hole is equipped with a switch for easy operation to ensure the accuracy of measurement and meet the GB/T1723 standard.
Using aluminum material, hollow structure design, volume 50ml, in line with the national standard GB/T6750, suitable for density measurement, Balance hammer filled with lead particles to adjust the weight.
