The thickness of the pressurable steel plate Aluminum Panel is 0.2~ 1.5mm, the weight of the whole machine is 50kg, and the compact shape is only 300 * 300 * 190mm, which meets the NCCA standard T-Bend test method.
Film thickness 0.3mm fillet Perforating design, easy to paint adhesion, hardness, Impact and other performance tests, about 70 pieces per kilogram to meet the needs of batch experiments.
Size 70x130mm Film thickness 0.3mm, rounded corners Perforating design is convenient for coating performance testing, suitable for adhesion, hardness, Impact and other film testing scenarios.
Film thickness 0.3mm fillet Perforating design, suitable for coating adhesion, hardness, Impact and other performance testing, to ensure that the film preparatory smooth and stable.
Double-sided uniform tin plating, surface mass I, Hardness T52, standard thickness 0.28mm, provide crimping listening plate, rounded corners with or without holes and other specifications, single batch pRoduction of 10w sheets.
Size 100x150mm, Film thickness 0.3mm, rounded corners Perforating design for easy fixing and operation, suitable for a variety of industrial coatings performance testing, to ensure the accuracy of film testing and repeability.
Using double-sided uniform tin plating process, the surface mass reaches class I, Hardness T52, standard thickness 0.28mm, to ensure accurate and reliable film test results.
With +/- 0.1% accuracy Sensor and 0.01mN resolution, it supports 1-92 ° bending angle adjustment and 0.5-50 °/sec angular speed control, with self-Adjustment and three independently adjustable test angles, suitable for 0.01-5 thickness materials.
Support 0.1-1 steel plate and 0.1-2 Aluminum Panel test, can complete 0T to 1T multi-stage bending, equipped with pliers pressing device and tape adhesion inspection function, to meet the standard bending test process.
The equipment can perform a 45 ° bending test, support 0.5~ 1.0mm plate thickness, equipped with Travel ≥ 10mm flattening mechanism, suitable for accurate testing of coating flexibility.
The gear pair and crank lifting mechanism are used to achieve accurate bending, the first bending angle is less than 45 °, the flattening mechanism Travel ≥ 10mm, which can test 0.5-2 mm thickness plates and support OT to T bend test.
The bending diaMeter of putty film cracking peeling is tested by bending test plate, and the shaft Rod size is 50mm and 100mm. It is suitable for 0.2-0 mm thick tinplate substrate, and the operation is simple and reliable.
Equipped with R25 and R50 two kinds of support film specifications, support 0.2-0 mm tinplate test plate substrate, through the rolling shaft uniform bending deformation, easy to observe the physical changes of the film.
The test bending angle is less than 45 degrees, suitable for steel plate thickness 0.5~ 1.0mm and Aluminum Panel thickness 0.5~ 2.0mm. The gear pair and crank lifting mechanism are used to achieve T-shaped bending, which is easy to operate.
The equipment can detect the crazing or peeling of the putty film after bending, equipped with R25 and R50 support film specifications, shaft Rod size is 50mm and 100mm in diaMeter, suitable for 0.2-0. 3mm thick tinplate plate.
