Using Slot-die Spreader technology, the thickness range of Spreader is 0.005-3mm, the bonding speed is 1~ 10m/min, and the drying temperature can reach 200 ° C. It is suitable for a variety of non-elastic materials to achieve accurate Spreader and efficient compounding.
Slot-die Spreader technology implementation of 0.005-3mm thickness precision control, composite roller heating temperature up to 200 ℃ to ensure firm gluing, equipped with 1 Meter drying tunnel and stepping motor to achieve 1-10m/min stable operation.
Slot-die Spreader technology implementation of 0.005-3mm thickness range of precision Spreader, composite roller heating temperature up to 200 ℃ to ensure firm gluing, servo motor control to achieve 0.001-10m/min stepless speed regulation, equipped with 1 Meter drying tunnel to achieve efficient drying curing.
Grooved Rods, wet film thickness 180μm, application width 60mm, K-shaped cogging bottom design, large tooth spacing, suitable for high viscosity Coating, excellent leveling.
The four-guide column structure is adopted to ensure smooth sliding and high accuracy, the knife die life is ≥ 30,000 times and there is no burr Linting defect, the maximum punching size is 100mmx140mm, and the volume is small and safe to operate.
Slot-die Spreader and gravure coating dual function design, Spreader thickness range of 0.005-3mm, drying temperature up to 200 ℃, bonding accuracy of 0.5mm, suitable for a variety of non-elastic materials stable composite and Spreader processing.
The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
Using slot-die coating method, application width ≤ 500mm, thickness range 10-250μm; equipped with automatic deviation correction and constant tension system, Oven temperature RT +~ 160 ℃, support segmented thermostatic, ensure Spreader accuracy +/- 3 microns.
Aluminum die-casting ceramic coating working plate is resistant to abrasion and corrosion, the highest temperature is 350 ° C, the temperature control accuracy is +/- 0.2 ° C, the DC brushless motor runs smoothly with low noise, and the double heating control circuit ensures temperature stability.
Adapted diaMeter 16mm formed Metering Rod, the total length of 2000mm, through the special structure to correct the straightness of the Rod body, to ensure stable rotation and full contact with the substrate, improve the thickness control accuracy of Spreader.
Spreader thickness accuracy of +/- 0.003mm, adjustable rate of 5~ 200mm/s, support Vacuum chuck and heating to 180 ℃, suitable for a variety of substrates and laboratory environments.
Linear dispersion surface is formed by cold extrusion processing technology, no risk of wire loosening, wet film thickness 50 μ m, can achieve ultra-thin film Spreader, smooth surface and easy to clean.
Formed pRoduction process, wet film thickness 131μm, K shape design at the bottom of the cogging, large tooth spacing, suitable for high viscosity Coating, better leveling.
Linear dispersion is formed on the stainless steel surface by cold extrusion processing technology, without the risk of wire loosening; the wet film thickness can be as low as 2 μm to achieve ultra-thin film Spreader; Linear dispersion on the surface is smooth and easy to clean, avoiding residual blockage of coating liquid.
K-shaped cogging design, large tooth spacing, suitable for high viscosity Coating, wet film thickness 100 μ m, excellent leveling, wider cogging bottom for Spreader operation.
