Overview
OSP-100T L400 coating rod is a Grooved Rods of Japanese OSP brand, with a total length of 400mm and an application width of 300mm. It is made of 304 stainless steel. The bottom of this model has a K shape and a large tooth spacing. It is suitable for high viscosity Coating and has good leveling. It is especially suitable for application scenarios with high glue viscosity such as silk, non-woven fabrics, etc.
Features
1. The bottom of the cogging is K-shaped, with large tooth spacing, suitable for high viscosity coatings.
2. leveling well, Spreader evenly.
3. Made of 304 stainless steel, it is durable and easy to clean.
4. The application width is 300mm and the total length is 400mm, which is suitable for medium-sized Spreader operations.
Principle
The coating rod formed by the process, using K-shaped cogging on the stainless steel rod to control the Coating thickness, when the rod rolling or scraping on the substrate, the cogging uniform distribution, forming a wet film thickness of 100μm, accurate Spreader.
Applications
Silk, non-woven fabric
Steps
1. Prepare Coatings and Substrates.
2. Place the coating rod at the starting position of the substrate.
3. Uniform force is applied to move the coating rod along the substrate.
4. Clean the coating rod after finishing the Spreader.
Notice
• Make sure the coating rod is clean and free of residue before use.
• Suitable for high viscosity Coatings, avoid low viscosity materials.
• Spreaders maintain uniform pressure to ensure consistent film thickness.
Store in a drying environment when not in use for a long time.
