Single chip computer digital circuit technology, Measurement range 10~ 1000mN, Indication Error +/- 1%, with 4-bit direct reading display and printing function, Test speed 1.2 +/- 0.24mm/s, suitable for accurate detection of softness.
The probe is designed with a depth of 8mm and a Probe width of 400mm, which simulates the softness of the hand. It supports a variety of slot-die width configurations. The built-in thermal printer can directly output the test results.
Test speed of 1.2mm/s and press depth of 8mm, equipped with 5-20mm multi-specification narrow width sample table, slot-die parallelism error ≤ 0.05mm, to ensure accurate and reliable softness measurement.
In accordance with IULCS. IUP 136 standard, the load is 500g, the scale range is 0.1-10 mm, the Portable design is easy to operate and maintain, and can detect the uniformity of leather Softness and site differences.
The probe is applied with a load of 530 +/- 10g, and the leather is pressed at a constant speed. The softness index is directly read through the electronic watch, which is suitable for testing a variety of leather types.
Micro Sensor measurement and control system to achieve automatic measurement, Measurement range 10~ 1000mN, accuracy +/- 1%, built-in thermal printer can directly output test reports, support custom slot-die width.
Response speed is improved with ARM processor, Measurement range 10-1000mN, accuracy +/- 1%, equipped with four-speed adjustable slot-die 5-20mm, support sudden power failure data saving and real-time pressure Linear dispersion display function.
Measurement range 10~ 1000mN, Test speed 1.2mm/s, 3.5-inch color LCD display test Linear dispersion, built-in thermal printer can directly output test reports, suitable for a variety of slot-die width tests.
Using digital DC motor to achieve stepless speed regulation of 1~ 1000mm/min, equipped with arc synchronous toothed belt and precision screw auxiliary drive system, the test accuracy can reach 1 level, and the test can be automatically completed and the maximum force value can be memorized.
Lever principle measurement device to reduce data fluctuations, equipped with High Accuracy Force Sensor, Measurement range 10~ 1000mN, accuracy 0.1mN, and built-in thermal printer directly output clear report.
With 0.001mm High Accuracy and 1.0μm resolution, low pin pressure design and digital linear encoder, it supports multiple international standards for thickness measurement of various sheet substrates.
Measurement range 0~ 12.7mm, accuracy ≤ 0.02mm, using digital display reading indexing value 0.01mm, simple structure and reliable mass.
Measurement range 0-4mm, contact pressure 100kPa, contact area 2cm ², equipped with digital dial Meter to achieve accurate thickness measurement.
Equipped with a digital ruler to collect displacement data, the resolution is up to 0.01mm, the maximum measurement load is 500N, the base has a mobile platform for easy installation of fixtures, and the side handwheel is easy to load and operate.
Measurement range 0~ 20mm, accuracy ≤ 0.02mm, Graduation 0.001mm, support 10kPa and 22kPa pressure settings, digital display reading, suitable for rubber hardness testing.
