With two test stations, the load range is 50~ 1000g, and three typical wear resistance tests of alcohol, eraser and pencil can be carried out, which is suitable for wear resistance evaluation of various coatings and materials.
Double station design can simultaneously carry out two sets of tests, round trip 0-50mm adjustable, test load 80-990g adjustable range, equipped with a variety of weight to meet the wear resistance performance evaluation requirements under different load conditions.
Precise load of 500g ensures test Stability and is suitable for calibrating and testing Wear resistance Testers to improve equipment performance.
Rotation speed 40rpm and roller diaMeter 150mm design, suitable for a variety of resilience material testing, abrasion Travel 40mm, test load optional 5N or 1N, to ensure efficient and accurate wear performance evaluation.
Equipped with six independent stations and two Lisaru motion trajectories, it supports a maximum of 999999 counts, and adopts a movement speed of 50rpm, which can simultaneously test the wear resistance performance of multiple sets of samples.
The equipment is equipped with eight independent stations for simultaneous testing, supporting 24mm and 60.5mm Li Sharu motion trajectories, with a maximum motion range of 60.5mm. It uses a 395g fabric weight and a 2385g pressure clock system to achieve multi-standard material wear resistance evaluation.
With no-segment adjustable Friction Frequency, speed range of 60 times/minute, support 10-50mm friction distance free adjustment, mirror stainless steel material, provide a variety of clamping and wear mode, power failure memory function to ensure test continuity.
Using electronic engraving technology to form a quadrilateral pyramid-shaped net hole structure, the number of lines 180LPI is inversely proportional to the wet film thickness, the width of the print surface is 70mm, and the surface chrome plating enhances the wear resistance and anti-corrosion performance.
The instrument is equipped with an eight-station synchronous test function, which supports 24mm and 60.5mm Li ShaRu motion trajectories, with a maximum motion range of 60.5mm. It meets a variety of standard requirements, is easy to operate, and counts intuitively.
Can set the moving distance 0.5-4 inches, speed 2-60 back and forth/minute and load 350-2100g, support a variety of abrasion media, stable and accurate testing, in line with a number of international standards.
Using standard cutter to cut the specimen, equipped with a variety of abrasive wheels optional, support 250g-1000g load adjustment, test plate Rotation speed 60-70 rpm, electronic counter automatic shutdown to ensure Test accuracy.
It has two LISHARU graphic motion track test modes, supports 60 × 40mm moving range, adopts 4 grinding head design, and the non-turning guide plate is convenient for sample loading operation.
Adopting quadrilateral pyramid-shaped net hole structure, the number of lines is 160LPI, the width of the printing surface is 70mm, and the surface chrome plating treatment enhances Abrasion Resistance and corrosion resistance, prolonging the service life.
Adopt 914mm pipe and 19mm inner diaMeter design, 45 degree test plate angle to ensure accurate impact of sand flow, adjustable height structure to meet different test needs
Using standard sand free fall brushing layer, straight grinding to expose 4mm substrate; can quantify the abrasion per unit thickness of the paint layer of sand volume, the inner diaMeter of the catheter 19mm, sample holder 45 degrees angle fixed.
