Using formed process, wet film thickness 18μm, application width 300mm, 304 stainless steel material to ensure durability and accurate Spreader effect.
Using 160 line metal anilox roller and rubber roller combination, print width 70mm, suitable for inks proofing, wet film thickness and the number of lines inversely proportional, proofing authenticity and easy to operate.
Pressure adjustable range -1 to + 1mm, proofing speed support 400-700rpm three-speed frequency conversion speed regulation, uniform ink time 15-800 seconds adjustable, fixed structure to ensure proofing Stability.
Adopt circular embossing method to improve the fit, the proofing speed is adjustable from 0-300rpm, equipped with High Accuracy Servo Motor and quick replacement anilox roller system, support a variety of gray scale customization.
Using formed pRoduction process, wet film thickness 4 microns, application width 250mm, can be equipped with a handle to achieve uniform force, improve Spreader effect.
Ceramic roller structure, line number standard 600LPI can be customized 70-1200 lines, BCM range 1.6-5; drawdown blade, ceramic roller and other components can be individually adjusted left and right pressure, proofing speed 0-80 m/min adjustable, support material thickness 0.01-2 mm.
Four-speed proofing speed is optional, up to 45m/min, using flat engraving plate for direct printing, supporting 95 × 149mm concave sample range, suitable for fast proofing of flexible substrates.
Equipped with strong clip fixed Spreader cardboard, four rubber foot pads at the bottom are non-slip, size 230 × 160 mm, weight 1.6 kg, improve Spreader Smoothness and Proofing Repeatability.
Using a formed pRoduction process, the film thickness is 47 microns, the application width is 250mm, and the 304 stainless steel material ensures durability and Spreader uniformity.
The formed pRoduction process ensures uniform film, provides 47 micron accurate wet film thickness, 304 stainless steel material is durable and easy to clean, suitable for a variety of Coating sample prepative.
Equipped with a strong fixture to fix Spreader cardboard, four rubber foot pads at the bottom to prevent sliding, 380 × 230 mm Glass platform to ensure Spreader Smoothness, improve Proofing Repeatability and Operating Stability.
Only 5-18ml sample volume is required to complete the test, the sample cartridge is easy to clean and load, and the 316L material measuringflask can be customized for easy observation and detailed analysis of fluid characteristics.
The adapter only needs 10-20mL sample volume, equipped with 21, 27, 28, 29 rotors, easy to disassemble and clean, can be connected to Thermostatic Bath to achieve temperature control, expand the viscosity measurement range.
Adopt stainless steel corrosion wire-wound, Abrasion Resistance, film thickness 102.9μm, application width 300mm, suitable for laboratory film proofing.
Equipped with rigid polyester board and foam rubber cushion, size 11x18cm, can absorb proofing pressure, improve Repeatability and proofing effect, suitable for a variety of substrate detection.
