The line pressure range is 0.33~ 80N/mm, and the width of the pressing roller is 300mm, which can complete ordinary pressing, high-pressure pressing, smooth pressing and calendering experiments, and support a variety of blanket pressing tests.
Using high elasticity standard rubber and denim for extrusion test, extrusion pressure 10-120kgf adjustable, Test speed 5-30 times/minute, to meet the requirements of YD/1539-2006 standard.
Constant pressure ensures uniform sampling, suitable for a variety of powder material testing, implementation of GB9087-88 and other standards, improve sampling accuracy and conformity.
Manual pressure control pressure holding operation is simple, electronic pressure holding device reduces mechanical abrasion, pressure range 0~ -90kPa, accuracy +/- 0.1kPa, Organic Glass sealing barrel wall thickness 15mm to enhance compressive strength.
Adopt 24-bit High Accuracy AD converter and stable pressure sensor, Measurement range 50~ 1400kPa, with full scale alarm and 3-speed limit protection function, support a variety of Unit switches and thermal printouts.
Using electric pressure system and circular pressing operation mode, printing pressure 0-4mm, speed 0-100 Meters, adjustable scraper pressure and speed, support low accuracy overprinting and Color detection.
Brushless motor to avoid Toner contamination of samples and reduce noise. The processing capacity covers 150 ml to 6 liters, supports a variety of head Modular replacements, and the intelligent Touchscreen can set the program, timing, line speed and torque.
Using R2.5mm steel ball to apply 20N pressure, test at standard temperature for 60 minutes and then evaluate the thermal deformation performance of the material through measurement of Crane diaMeter, which is suitable for testing of various electrical components.
The 0-16bar positive pressure method is used to test, which avoids the low pressure limit. The sealing situation can be judged by observing the leakage or pressure drop by inflation and pressure. Sensitivity is high and the reading is accurate.
Measurement range 0-4mm, contact pressure 100 +/- 10kPa, contact area 200mm ², with High Accuracy Indication Error +/- 0.0025mm, suitable for all kinds of sheet material thickness measurement.
The homogenizing time is up to 3000 seconds, the speed range is 100-10000rpm, and the acceleration is 100-10000rpm/s. It supports multi-stage program control. Vacuum chuck ensures the stability of the substrate and is suitable for assembly line processes.
The pressure column and ball joint structure are used to ensure that the test surface is close, the pressure column mass is 250g, the bottom surface diaMeter is Φ 50 +/- 1mm, and it is equipped with 100g to 500g weight, which can simulate the contact performance of coatings under different pressure conditions.
Support 12 sets of program control, uniform glue time up to 3000 seconds, speed range of 100~ 4000 rpm, equipped with Vacuum chuck system to ensure substrate stability, multi-stage speed and time stepless adjustable, improve coating uniformity and process controllability.
304 stainless steel material corrosion resistance, Operating Pressure up to 8kg/cm2, temperature measurement accuracy +/- 0.1 ℃, pot body rotation design makes the raw materials mix evenly, electronic control system brushless conductive to avoid common failures.
Measurement range of pressure -100 to 6000Kpa, temperature range -10-200 ℃, support 83 kinds of refrigerants, suitable for refrigeration system maintenance and fault diagnosis.
