Magnetic surface temperature measurement Probe through strong magnetic adsorption on the workpiece, small volume and light mass, Sensor and magnet insulation to ensure measurement accuracy, the highest temperature 480 ℃, especially suitable for circular workpiece surface.
The clamping design ensures good contact with the workpiece surface, the lightweight shape avoids affecting the temperature, the Teflon sheath is flexible and durable, with a maximum temperature resistance of 300 ° C, and the ceramic insulation guarantees accurate readings.
The clamping design ensures close contact with the surface of the workpiece, Teflon wires are easy to clean and flexible and durable, the maximum Operating temperature is 300 ° C, and the lightweight structure avoids measurement interference.
It can simultaneously measure the temperature of 8 channels, support K-type Thermocouple temperature measurement range -200~ 1300 ℃, use true color TFT-LCD display, with data recording and upper and lower limit alarm functions, Sampling rate 1.5 seconds.
Single-channel design, supports J, K, T, E, R, S, B, N-type Thermocouple Probe, internal thermistor cold junction compensation, temperature error +/- 0.21 ° C, recording interval can be flexibly set from 1 second to 18 hours.
Using 16-bit AD converter and K-type Thermocouple, sampling speed 16 times per second, Measurement range -50 ° C to 1300 ° C, support Fahrenheit switching and data retention functions.
Four-channel configuration with K-type Thermocouple, the sampling rate can be adjusted from 1 second to 1 minute, and the thermal insulation performance can last for 60 minutes in a 500 ° C environment to achieve full temperature tracking monitoring.
Four-channel K-type Thermocouple with 0.5% accuracy, the insulation box can work continuously for 1 hour in a 300 degree environment, supports multi-rate sampling and 16000 Data storage, Stability is high and easy to operate.
Adopt PID self-tuning function to achieve +/- 1 ℃ temperature control accuracy, speed range 0-2500rpm, 30 ° inclined surface operation panel is easy to observe, Pottery and porcelain coatings are resistant to corrosion and high temperature.
Using magnetic Induction Measuring method, range 0~ 5mm, error +/- 5%, can measure a variety of non-ferrous magnetic coatings, suitable for different curvature substrate surface.
Microcrystalline Pottery and porcelain plate surface corrosion resistance and easy to clean, aluminum alloy shell integrated molding, speed range 0-1250rpm stepless speed, Max.stirring Capacity 3L, ND servo motor drive output power 9W.
Adopt magnetic yoke structure, lifting force up to 7.1kg, pole distance adjustable 0-220mm, Sensitivity to meet A1 test piece display requirements, suitable for welding and Pressure Vessel internal work.
With point and continuous operation mode, Speed range 200-2500rpm, reinforced engineering plastics and TPU work surface, acid and alkali wear resistance, support magnetic stirring and microplate adaptation.
Using magnetic Induction and eddy Current dual principle, Measurement range 0-3000μm, accuracy +/- 3%, automatically identify the matrix material, no need to calibrate only zero, easy to carry and lightweight.
Using magnetic Induction principle, Measurement range 0-3000μm, accuracy +/- 3%, integrated Probe design, minimum measurable Φ 25mm plane and convex 5mm surface, to meet a number of international standards.
