The test bending angle is less than 45 degrees, suitable for steel plate thickness 0.5~ 1.0mm and Aluminum Panel thickness 0.5~ 2.0mm. The gear pair and crank lifting mechanism are used to achieve T-shaped bending, which is easy to operate.
A bending angle is less than 45 degrees, can test 0.5~ 1.0mm Film thickness sample, flattening mechanism stroke is not less than 10mm, using crank lifting mechanism to achieve T-shaped bending test.
Support 0.1-1 steel plate and 0.1-2 Aluminum Panel test, can complete 0T to 1T multi-stage bending, equipped with pliers pressing device and tape adhesion inspection function, to meet the standard bending test process.
Equipped with 2 to 12mm eight diaMeter stainless steel cylindrical mandrel, in the form of hinged bending, in line with GB6742 standard, suitable for Coating bending performance testing.
The gear pair and crank lifting mechanism are used to achieve accurate bending, the first bending angle is less than 45 °, the flattening mechanism Travel ≥ 10mm, which can test 0.5-2 mm thickness plates and support OT to T bend test.
Using 12 stainless steel shaft Rods with a diaMeter of 2-32mm, the 50mm wide test plate can be tested for 180 ° bending. The coating cracking situation is detected by decreasing the diaMeter of the shaft Rod, and the operation is simple and fast.
The instrument is equipped with eight kinds of diaMeter stainless steel cylindrical mandrel, which adopts the form of hinge connection bending, which can accurately test the bending deformation of coatings under different diaMeters to ensure the test Reliability.
Using pure mechanical design, the coating performance is measured by conical mandrel bending test plate, the test plate size is 100mm × 180mm, the thickness is less than or equal to 0.8mm, and the operation is simple and reliable.
Measurement width 200mm, thickness within 1.5mm test plate, stainless steel cone diaMeter range 3.2-38 mm, anodic oxidation aluminum material, complete 180 ° bending test within 15 seconds.
The thickness of the pressurable steel plate Aluminum Panel is 0.2~ 1.5mm, the weight of the whole machine is 50kg, and the compact shape is only 300 * 300 * 190mm, which meets the NCCA standard T-Bend test method.
Equipped with 12 high-Hardness stainless steel shaft Rods, with a diaMeter range of 2-32mm, it supports two test methods to determine the cracking resistance of coatings, and the clamping device is designed for easy plate fixing and shaft Rod replacement.
Can test 4 shoes at the same time, bending angle 0 °~ 90 ° adjustable, Test speed 0~ 140 times/min, with automatic return and LCD counter function.
Maximum load 100KN, suitable for bending testing of various materials, with high load-bearing capacity and Stability, to meet different testing requirements.
With a bending angle of 135 degrees and a folding speed of 175 times per minute, it can apply a test load of 4.91N to 14.72N, and the automatic counting function accurately records the number of breaks, which is suitable for material durability testing.
It can measure three different angles at the same time, the angle range is adjustable from 1-92 °, the Measurement range is 0-10000mN, and it supports a variety of material tests with bending length and thickness 0.01-5 mm. It has automatic reset and self-Adjustment.
