Laser Sensor is used to directly measure the natural vibration Frequency of the belt, combined with the input belt mass and free length to calculate the tension, Measurement range 10Hz~ 500Hz, split Sensor size can penetrate into 66mm narrow space, support Metric Imperial Unit switch.
Laser Sensor is used to directly measure the natural vibration Frequency of the belt. Measurement range is 10Hz~ 800Hz. The size of the split Probe is only 124 * 21 * 12mm. It can penetrate into a small space of 66mm and supports metric and imperial Unit switching.
Using quartz time base technology to ensure accurate measurement, Maximum Measured value 750N, Real-time display of tension data and support for voice prompts, automatic storage of upper and lower limit setting values, providing USB, RS-232 and Bluetooth Data output methods.
Laser Sensor is used to directly measure the natural vibration frequency of the belt. Measurement range is 10-800Hz. The split probe size is 124 * 21 * 12mm and can penetrate into a small space of 66mm. It supports metric and imperial unit switching.
Real-time display of tension value and accompanied by sound and light indication, no need to continuously observe the screen; automatic storage of upper and lower limits and calibrated data, power failure is not lost; Measurement range 0-750N, accuracy +/- 5%, support a variety of unit conversion.
Laser Sensor is used to directly measure the natural vibration frequency of the belt. The size of the split probe is only 124 * 21 * 12mm, which can penetrate into the depth of 66mm. Measurement range is 10-500Hz, and it supports metric and imperial unit switching.
Adopting stainless steel shell, the belt is equipped with a sink to collect grinding materials, the belt adjustment device can adjust the tightness, Rotation speed 1400rpm, Power 0.55kW, easy operation and maintenance.
Hollow cylinder center aperture 65mm, maximum tension 600KN, manual pump high voltage 63Mpa, digital pressure Gauge direct reading tension value, compact structure and easy to carry.
Measurement frequency up to 680Hz with accuracy in the range of +/- 1Hz to +/- 1%, suitable for transmission system vibration detection.
It can be used with Force Gauge for vertical and horizontal testing, suitable for accurate measurement of thrust or tension, stable structure and easy operation.
Hollow cylinder center aperture 60mm, maximum tension 500KN, piston Travel 120mm, using quick connector connection, manual pump with high voltage 63Mpa working capacity, suitable for a variety of anchoring physical examination.
Hollow cylinder center aperture 75mm, maximum tension 800KN, piston Travel 120mm, compact structure and easy to carry, manual pump with high voltage 63Mpa working capacity, can directly read the tensile value.
The central aperture of the hollow self-resetting hydraulic cylinder is 18mm, the maximum pulling force is 10kN, and it is equipped with a digital pressure Gauge to read the tensile force value directly. The structure is compact and easy to carry. The manual pump can be used as a general high voltage oil source.
The central aperture of the hollow self-resetting hydraulic cylinder is 34mm, the maximum pulling force is 150kN, and the digital pressure Gauge can directly read the tensile force value. The structure is compact and the manual pump can be used as a general high voltage oil power source.
Rated load 1000N, Travel 100mm, manual operation is stable, can adapt to a variety of Force Gauge, suitable for tension and compression load and plug force test, horizontal structure for desktop installation.
