Equipped with 1mm and 2mm cutter head spacing, the number of cutter teeth is 11, which can meet the needs of different paint film thickness testing, easy to operate and in line with international standards.
Set cross-cut adhesion, film thickness and Buchholz Crowd Hardness three test functions in one, cross-cut knife 6 blade spacing 1mm/2mm, Crowd knife load 500 +/- 5g, using the destruction Measurement principle.
35Mm cross-cut length and 1mm pitch design, stainless steel material to ensure dimensional accuracy, equipped with tape and brush for film adhesion testing.
Made of 304 stainless steel, with a cross-cut length of 23-35mm, it provides four spacings of 1-3mm and 7/11 cross-cut numbers to meet different standard testing requirements.
35Mm cross-cut length with 2mm spacing design, 11 teeth to ensure test accuracy, 304 stainless steel material to ensure durability, suitable for film adhesion evaluation.
The number of teeth is 6 teeth, the spacing is 2mm, and the multi-cutter surface circumference and multi-faceted design is adopted, which has a long service life and is suitable for 60 to 120μm hard substrate samples.
35Mm cross-cut length with 11 teeth design, 1.5mm precise spacing to ensure test accuracy, 304 stainless steel material to ensure durability, equipped with tape and nylon brush to complete the complete test process.
Equipped with three swirl/spin cutter heads, the tooth spacing is 1mm, 2mm and 3mm respectively, and it is designed according to ISO2409 standard for accurate evaluation of coating adhesion performance.
35Mm cross-cut length with 6 teeth design, 3mm precise spacing to ensure test accuracy, 304 stainless steel material to ensure durability, equipped with tape and brush complete set.
Designed with 11 teeth and 1mm spacing, stainless steel ensures durability and meets ASTM D3359 standards for coating adhesion testing in the 0-50 µm film thickness range.
Multi-blade design is equipped with 6 cutter teeth, 1.5mm equal spacing arrangement, suitable for 50~ 125μm film thickness environment testing, to ensure cross-cutting accuracy in line with international standards.
11 tooth cutter design, 2mm pitch, single-sided simple cutter head, can carry out cross-cut experiment, test coating adhesion, in line with a number of international standards.
11 teeth design with 1.5mm spacing, can accurately test 121-250 µm film thickness coating adhesion, stainless steel material to ensure durability, in line with ASTM standards.
The circular cutter is designed with eight incisions and 1mm spacing between the teeth. It is suitable for strong substrate adhesion testing with a Coating thickness of less than 60 microns and meets the requirements of ISO 2409.
Hardness High Abrasion Resistance, cutting speed 20-50mm/s, suitable for film thickness 0~ 60μm, Handheld design is convenient for laboratory and field use.
