Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
Equipped with dual coating methods of wire rod and blade, with an infinitely adjustable coating speed of 1–300 mm/s, wire rod accuracy of ±0.001 mm, blade accuracy of ±0.003 mm, and optional heating and vacuum adsorption functions to meet coating requirements of various thicknesses.
Using 400 wire metal anilox roller to control the ink film thickness, flexographic samples can be quickly prepared, easy to use and clean, and the repRoducibility is very similar to that of conventional flexographic printing.
Using 140 wire metal anilox roller to control ink film thickness, flexographic samples can be quickly prepared, easy to use and clean, and high repRoducibility.
Using 100 wire metal anilox roller to control ink film thickness, it can quickly prepare flexographic samples, easy to operate and clean, and good repRoducibility.
The wire-wound structure enables coating with a 171.5-micron thick film, while the stainless steel material ensures corrosion resistance and long-term durability. The 9.52mm diaMeter Rod body, combined with 1.91mm steel wire, ensures operational stability.
Utilizing a dual coating method with wire rod and doctor blade, the coating speed is adjustable from 1 to 300 mm/s with stepless speed control, ensuring high precision in film thickness control. Equipped with vacuum adsorption and heating functions, the temperature uniformity reaches ±1°C. The flip-top design facilitates easy cleaning.
A wet film of 148.6 μm can be prepared using a wire-wound process with a 1.65 mm wire diaMeter, ensuring accurate and durable coating while preventing wire breakage issues.
Adopting a wire-wound process, with a wet film thickness of 9.1 microns and a coating width of 300mm, it is suitable for ultra-thin coating requirements, offering high precision and ease of operation.
Utilizing a wire-wound process, with a wet film thickness of 91.4 μm, a coating width of 300 mm, and durable stainless steel construction, the wire diaMeter of 1.02 mm ensures uniform coating, making it suitable for various surface treatments.
Using 0.06mm ultra-fine stainless steel wire, the wire diaMeter is thinner than the common 0.07mm in the market, the bristles are soft and can be deeply cleaned without damaging the roller surface, suitable for fine cleaning applications.
Wet film thickness 68.6μm, coating width 300mm, pRoduced using a wire-wound process, with stainless steel material ensuring durability and precise coating performance.
Using a wire-wound coating process, with a wet film thickness of 32.0 μm and a coating width of 300 mm, it is suitable for substrates prone to curling and convexity, enabling uniform wet film coating, with a wire diaMeter of 0.36 mm.
A wet film of 100.6 microMeters was prepared using a wire-winding process, with a coating width of 300 mm. The film thickness was precisely controlled using a steel wire with a diaMeter of 1.12 mm, and the extrusion process eliminated the need for wire winding.
The wire-wound process can pRoduce a wet film thickness of 96 μm with a coating width of up to 300 mm, utilizing stainless steel material to ensure durability and precise coating control.
