It can prepare a wet film thickness of 13.7 microns, with a wire-wound design providing stable coating performance. The 9.52 mm diaMeter ensures easy operation, making it suitable for various paint application scenarios.
Wire-wound structure ensures 0.1 micron High Accuracy, wet film thickness 50.3 μm, stainless steel material is durable and easy to clean, and the wide-Rod Film Applicator achieves uniform coating.
Using a formed pRoduction process, the film thickness is 114.3 μm, and the film uniformity accuracy can reach 0.1 μm, which is suitable for a variety of coating applications.
Using the formed pRoduction process, Coating Weight is about twice that of the wire-wound coating Rod, wet film thickness is 13μm, film accuracy reaches 0.5 μm, and the material is 304 stainless steel.
Using 180 * 480mm size, with wire Rod or Film Applicator scraping ink, is conducive to the film flat and effective, improve film mass.
The formed design ensures uniform film, the wet film thickness is precisely controlled to 2μm, the application width is 60mm to meet the small area requirements, and the 304 stainless steel material ensures durability and cleaning convenience.
Formed design, wet film thickness 30 microns, application width 60 mm, 304 stainless steel material, accuracy of 0.5 microns, suitable for small width Spreader needs.
Using a formed pRoduction process, the film Film thickness is as thin as 4.6μm, the accuracy is up to 0.1 micron, and the effective Spreader width is 30cm. It can be used with an automatic Film Applicator and has the advantage of continuous wire.
Imported High Accuracy coating Rod, Spreader thickness range 1~ 571.5μm, accuracy +/- 0.003mm, speed 5~ 200mm/s, support Touchscreen control and a variety of customized functions.
Wet film thickness 12 microns, application width 60 mm, the use of formed pRoduction process and 304 stainless steel material, suitable for small area experimental needs, to avoid unnecessary cost waste.
Wet film thickness 45μm, main Rod diaMeter 10mm, effective application width 600mm, using SUS304 material, Coating Weight, length and surface preparation can be customized, suitable for a variety of Spreader conditions.
Support bar and Drawdown blade two coating methods, suitable for different viscosity materials. Equipped with heating and Vacuum chuck function, servo motor to ensure stable operation. Drawdown blade film thickness control accuracy is high, uniform film.
Adopting 500 * 700mm Dimensions, used with bar or Film Applicator, is conducive to the smooth and effective film, and improves the convenience of film operation.
Support bar and Drawdown blade double coating method, suitable for high, medium and low viscosity materials; coating speed 1~ 300mm/s stepless adjustable, Blade Coating accuracy +/- 3μm; equipped with innovative clamshell magnetic Drawdown blade and simple bar installation, easy to clean and load; Heating and Vacuum chuck function to improve Spreader mass.
Moulding accuracy, small size, can be prepared 12 kinds of wet film thickness, range 30-600μm, Spreader width is not less than 60mm, especially in the Moulding process Coating does not spill.
