High-Temperature Electric Heating Oven

The high-temperature electric oven heats the air through electric heating elements, creating a uniform high-temperature environment in a closed chamber for drying, curing, or heat-treating samples. In industries such as coatings and plastics, it is used to remove moisture, test heat resistance, or accelerate material reactions, such as drying coatings or evaluating the thermal stability of plastics.
Selection
When selecting a high-temperature electric heating oven, consider whether the temperature range and uniformity meet the sample requirements. The oven body material should be corrosion-resistant, the control method should be simple and reliable, and safety features such as over-temperature protection are essential. The size should be determined based on the sample dimensions and available space, and energy consumption and maintenance costs should also be evaluated.

Terms

Standards

Instruments

Adopting high-temperature non-alkali fiberglass insulation layer sealing resistance wire, the heating area is large and the temperature rises quickly, the maximum operating temperature is 380 ° C and supports continuous work, and the hemispherical design is not easy to bruise Glass ware.

$ 222.00

Using electric heating to directly generate high voltage steam, the highest Operating temperature 135 ℃ and accuracy of 0.1 degrees, with time temperature level control and automatic pressure chill down, 3 minutes after cooking items can be reduced to 20-40 ℃.

$ 3009.00

Adopting high-temperature non-alkali fiberglass insulation layer sealing resistance wire, the heating area is large and the heating is fast, the maximum operating temperature is 380 ℃, and the hemispherical internal thermal design avoids the danger of open flame.

$ 212.00

The use of high-temperature non-alkali fiberglass insulation layer wOven into a hemispherical internal heating heater, heating area and heating up quickly, the highest temperature of 380 ℃, no open flame design to avoid bruising Glass ware.

$ 131.00

Adopting high-temperature non-alkali fiberglass insulation layer sealing resistance wire, the heating area is large and the temperature rises rapidly, the maximum operating temperature is 380 ℃, the hemispherical inner thermal design avoids bumping Glass ware, and supports Continuous Operating Mode.

$ 206.00

The digital display temperature control is accurate and reliable, the hot air circulation system is composed of a high temperature fan and a suitable air duct to improve the Temperature uniformity in the working room, and the heating wire is installed at the bottom to heat up quickly.

$ 2171.00

The use of high-temperature non-alkali fiberglass insulation material wOven into a hemispherical internal thermal structure, heating area and heating fast, the highest temperature 380 ℃ and support continuous work, no open flame design to avoid bumping Glass ware.

$ 119.00

Temperature range RT + 10~ 300 ℃, Temperature Fluctuation +/- 1 ℃, stainless steel liner corrosion resistance, electric heating tube heating fast and uniform, intelligent digital display easy to operate.

$ 403.00

Using high temperature non-alkali fiberglass insulation material, the highest temperature 380 ℃, with internal and external dual Sensor temperature measurement function, large heating area and rapid heating, excellent thermal insulation effect.

$ 151.00

Adopt electronic voltage regulation circuit without electric shock, Temperature range environment temperature to 380 ℃, can work continuously, large heating area and no open flame design, avoid bumping Glass ware.

$ 123.00

Using high temperature non-alkali fiberglass insulation material sealing resistance wire, large heating area and heating fast, the highest temperature 380 ℃, support internal and external dual Sensor temperature measurement, no open flame design to avoid bumping Glass ware.

$ 170.00

The use of high temperature resistant fiberglass insulation material wOven into a hemispherical internal heating heater, the highest temperature of 380 ℃, heating area and rapid heating, excellent insulation effect, to avoid the risk of open flames.

$ 667.00

The use of high temperature resistant fiberglass insulation material wOven into a hemispherical internal heating heater, heating area and heating fast, the highest temperature of 380 ℃, with electronic voltage regulation function can achieve accurate temperature control, no open flame design to avoid bruising Glass ware.

$ 122.00

Adopting high temperature resistant non-alkali fiberglass insulation material, the maximum operating temperature is 380 ℃, with internal and external dual Sensor temperature measurement function, large heating area and no open flame design.

$ 143.00

Adopt high temperature resistant non-alkali fiberglass insulation material, the maximum operating temperature is 380 ℃, support internal and external dual Sensor temperature measurement, large heating area and no open flame design, can work continuously.

$ 160.00

Articles

Application of High-Temperature Viscometer in Testing the Melt Viscosity Characteristics of Hot Melt Ink
This article introduces a method for testing the melt viscosity of hot-melt ink using a high-temperature viscometer. The test employs a rotational viscometer to measure the viscosity of three ink samples at different temperatures.
Application of High-Temperature Universal Testing Machine in the Study of Hot Modulus of Rupture of Refractory Materials
This article introduces the application of a high-temperature universal testing machine in measuring the hot modulus of rupture of refractory materials. It explains the working principle, testing procedure, and key parameters of the testing machine, such as the effects of heating rate, holding time, and loading rate.
How is a high-temperature muffle furnace applied in ash determination?
This article introduces the application of high-temperature muffle furnaces in ash determination. The principle of ash determination involves completely burning the sample at high temperatures, leaving behind inorganic mineral residues. The muffle furnace provides a stable and controllable thermal environment, ensuring accurate results.
Ultrasonic Thickness Gauge Selection: Technical Considerations for Probe Configuration and Measurement Modes
This article primarily introduces the technical factors to consider when selecting an ultrasonic thickness gauge. In terms of probe configuration, the frequency affects both resolution and penetration depth, while crystal size determines adaptability to curvature and surface conditions. Dual-element probes offer a smaller dead zone compared to single-element probes, and delay-line probes are suitable for thin-wall and high-temperature applications.
Application of Three-Chamber High and Low Temperature Test Chambers in Rapid Temperature Cycling for Electronic Products
The three-chamber high-low temperature test chamber is used for reliability testing of electronic products, enabling rapid temperature transitions through independent high temperature, low temperature, and test zones. Compared to traditional single-chamber equipment, it reduces temperature change time and enhances testing efficiency.
Temperature Oscillation Suppression in Reflux Synthesis Using Laboratory Stirring Heating Mantles
This article explores the causes and suppression methods of temperature oscillations in laboratory heating mantles during reflux synthesis.
High-temperature viscometer evaluates the flow characteristics of ceramic coatings before sintering.
This article introduces how to use a high-temperature viscometer to evaluate the flow characteristics of ceramic coatings before sintering. During measurement, the instrument detects changes in the viscosity of the coating sample under simulated sintering temperature conditions using rotational or oscillatory principles.
High-temperature viscometer measures the flow behavior of powder coatings in the molten state.
This article introduces the use of a high-temperature viscometer to measure the flow behavior of powder coatings in their molten state. Powder coatings need to melt and flow before curing, a process that directly affects the smoothness and performance of the coating.
Temperature uniformity of high-temperature aging test chamber for UV resistance testing of inks
This article discusses how the temperature uniformity of high-temperature aging test chambers affects the accuracy of ink UV resistance testing. Temperature uniformity refers to the deviation in temperature at various points inside the chamber, with smaller deviations leading to more reliable test results.
High-temperature aging test chamber accelerates life testing of electronic components.
The high-temperature aging test chamber accelerates the physical and chemical changes within electronic components by simulating high-temperature environments, thereby predicting their long-term performance and failure modes.
Research on the Stepwise Curing Process of Coatings Using Multi-Stage Temperature Control Ovens
This article investigates a novel process for achieving stepwise curing of coatings using a multi-stage temperature-controlled oven.
Thermal shock test chamber measures the thermal shock resistance of polymer films.
This article introduces how to test the thermal shock resistance of polymer films using a thermal shock test chamber. The test involves rapidly switching the film between high and low temperatures to simulate the drastic temperature changes that may occur in actual use, thereby generating thermal stress within the material.
Hot air aging oven measures the long-term thermal-oxygen life of engineering plastics.
This article introduces how to use a hot air aging oven to test the long-term thermal-oxidative lifespan of engineering plastics. The test is based on the Arrhenius equation, which accelerates material aging at high temperatures to simulate performance changes under actual usage conditions.
Melt flow index tester measures the processing fluidity of high-temperature engineering plastics.
This article introduces how a melt flow indexer measures the processing fluidity of high-temperature engineering plastics. It first explains the working principle of the instrument, which involves measuring the rate at which molten plastic passes through a standard die under specific temperature and pressure conditions to obtain the melt flow rate value.
High-temperature aging chamber for testing thermal-oxidative aging of plastic films.
This article introduces the method of testing the thermo-oxidative aging of plastic films using a high-temperature aging chamber. Thermo-oxidative aging refers to the chemical changes that occur in plastics under high temperature and oxygen exposure, leading to a decline in performance.