Using reciprocating motion to simulate transportation abrasion, Friction Frequency 0~ 2.5Hz adjustable, Test Travel 12.7~ 50.8mm, support continuous test 0~ 24 hours, suitable for a variety of can sizes and pressure conditions.
Scruf Travel 20-300mm adjustable, speed range 1-60cpm, equipped with TFT full color display and intelligent Operating interface, supports manual testing and is compatible with a variety of standard accessories, suitable for coating Abrasion Resistance evaluation.
Can set the moving distance 0.5-4 inches, Rotation speed 2-60 times/min and other paraMeters, support wet and dry abrasion test, can test any size or shape sample, ensure test Stability and accuracy.
Can test inks multi-directional adhesion at the same time, Friction Frequency 43cpm, Friction Load 2lb/4lb, Abrasion Resistance evaluation by measurement density or Coating thickness reduction, support 0-99999 automatic shutdown.
Adopt digital control constant speed technology, maintain constant power operation at low speed, Max. Torque 0.3Nm, maximum processing viscosity 20000mPa · s, support reversible and timing functions.
With four adjustable friction Frequency 21/43/85/106cpm, friction load 20N, support linear reciprocating friction movement, power-off memory function to ensure that paraMeters are not lost, effective analysis of coating adhesion and wear resistance performance.
The constant speed control circuit is used to ensure stable speed, and the DC motor provides greater torque at low speed with force-increasing speed regulation. The speed control accuracy reaches +/- 1 rpm, and the operation is smooth and noise-free.
With constant speed control function, the speed is not affected by voltage fluctuations; DC motor with booster speed regulation, providing greater torque at low speed; speed range 200~ 3000rpm, control accuracy up to +/- 1 rpm, smooth operation without noise.
Adopt electronic constant force speed control circuit, digital direct display Rotation speed, Power 60W, Speed range 100-2000rpm, can adapt to different experimental needs, provide correct process data.
With constant speed control function, speed accuracy up to +/- 1 rpm, torque significantly enhanced at low speed, support 0-9999 minutes timing, smooth operation without noise, suitable for long-term continuous operation.
Output power 200W, Speed range 100~ 2000rpm, using electronic constant force speed regulation and digital display, can adapt to different test needs, provide high linear speed swirl/spin tangential, to achieve efficient mixing and dispersion.
Using electronic constant force speed control circuit, Speed range 100-2000rpm, output power 90W, can directly display the shaft Rotation speed, adapt to different test needs, provide high line speed shear effect, achieve efficient Mixing & dispersing.
The constant speed control circuit is used to ensure stable speed, and the torque increases at low speed when the DC motor cooperates with the force increase speed regulation. The speed range is 200~ 3000rpm, the accuracy is up to +/- 1 rpm, and the operation is smooth and noise-free.
The constant speed control circuit is adopted to ensure stable speed, and the torque increases at low speed when the DC motor cooperates with the force increase speed regulation. The speed range is 200~ 3000rpm, the accuracy is up to +/- 1 rpm, and the operation is smooth and noise-free.
Adopt electronic constant force speed control circuit, Speed range 100-2000rpm, output power 120W, low running noise and stable speed regulation, can directly display Rotation speed and calculate line speed, adapt to different experimental needs.
