Temperature range RT + 5~ 99 ℃, Temperature Fluctuation +/- 0.5 ℃, stainless steel liner, beaker hole can be arbitrarily changed in size, over-temperature sound and light tracking alarm to protect the sample.
The use of low-energy centrifugal fans makes the airflow uniform and stable, with an average wind speed of 0.25 to 0.45m/s and noise less than or equal to 62dB (A). The mirror stainless steel countertop is corrosion-resistant and easy to clean, and the tripod and cabinet are separated for easy transportation.
The cuboid studio improves the effective volume utilization rate, temperature control accuracy +/- 1 ℃, drying time is shortened by more than 40% compared with traditional equipment, and can be heated and tested in an oxygen-free or inert gas environment.
Using 200g weight and 1cm ² bottom area design, in line with GB/T 1728 standard, through the filter paper test method to accurately determine the film surface drying and practical drying time, easy to operate, reliable results.
Using 200 +/- 0.2 g weight and 1 square centiMeter bottom area design, the drying process of the paint film was accurately determined by the cotton ball method to distinguish between surface drying and actual stages in drying.
The circular track is used to automatically record the film drying process continuously, equipped with 4 kinds of specifications to choose from, the track diaMeter is 100mm, and the measurement error is +/- 0.5%, which can intuitively analyze the stages in drying state.
Double station design can process two samples at the same time, Vacuum Level up to -0.098MPa, drying time only 4-6 minutes, suitable for rapid drying of wet paper samples with a diaMeter of no more than 200mm.
Using arc surface drying plate design, the maximum temperature can reach 180 ℃, Heating power 2500W, the steam is quickly discharged during the drying process, easy to operate and maintenance-free.
Infrared heat source for fast drying, Power 550W, metal material to ensure durability, built-in heating element to pRoduce uniform heat cycle, effective evaporation of water, suitable for drying various materials.
Temperature control accuracy +/- 0.3 ℃, resolution 0.1 ℃, mirror stainless steel liner for easy cleaning, silicone sealing ring to ensure high sealing, microcomputer controller provides stable and reliable operation.
Using stainless steel liner, beaker hole can be arbitrarily changed size, temperature control accuracy +/- 0.5 ℃, with over-temperature sound and light tracking alarm function to ensure the safety and reliability of the sample.
Using infrared radiation heating, fine grinding mirror drying surface, heating power 2.0KW, maximum temperature 180 ℃, drying size 600mm × 350mm, to ensure uniform drying and smooth surface.
Vacuum heating drying technology, Vacuum Level up to -0.098MPa, pumping 80-120 liters/min, drying time is only 4-6 minutes, with intelligent PID temperature control and over-temperature alarm function, easy and safe operation.
Temperature range RT + 10-300 ℃, Temperature Fluctuation +/- 1 ℃; using low noise fan and hot air circulation system, dry hot air directly through the heated object; with overheating, leakage, Sensor fault alarm function.
Temperature control accuracy of +/- 0.5 ℃, Temperature resolution of 0.1 ℃, with over-temperature sound and light alarm function, stainless steel liner can adapt to different beaker sizes, support internal and external circulation, ensure sample safety and stability.
