High-temperature sensitive sticker

High-temperature temperature-sensitive stickers contain thermochromic materials that change color at specific temperatures. They are used to monitor the surface temperature of objects and confirm heating conditions in processes such as injection molding and welding.
Selection
When selecting, confirm the temperature measurement range and accuracy, and match the surface material of the object being measured. Consider the size of the sticker and the reversibility of color change, and check the product's compliance with standard requirements.

Terms

Standards

Instruments

Irreversible discoloration design, the temperature window from white to red is clearly recognizable, with oil-proof and waterproof protective film, the back sticker is easy to paste, can be stored for 2-3 years, each 120 pieces size 12x30mm.

$ 150.00

Single point temperature monitoring, permanent discoloration irreversible after overheating, specification 2.5x4 cm, with anti-fouling protective film, indoor service life of 3 years, outdoor 2 years.

$ 89.00

Measurement range 0~ 14pH, Operating temperature 0~ 80 ℃. High strength conical sensitive membrane can pierce semi-solid sample.

$ 285.00

Using irreversible discoloration technology, with three temperature windows, Temperature range 70 ℃ to 120 ℃, Back Pressure sensitive adhesive design is easy to paste, size is 12x30mm.

$ 150.00

Irreversible discoloration design, the temperature window display is clear; three temperature measurement points cover 70 ° C, 85 ° C and 120 ° C; size 12x30mm, 120 pieces each, with Pressure sensitive adhesive for easy sticking.

$ 150.00

Temperature sensitive discoloration paint after overheating Color from white to transparent, discoloration effect depends on the object surface Color, Measuring temperature 65 ℃, suitable for rough oil surface use.

$ 131.00

Temperature sensitive discoloration paint after overheating Color from white to transparent irreversible, Measuring temperature 120 ℃, suitable for rough oil surface, Net weight 100 grams of plastic bottles.

$ 131.00

Temperature sensitive discoloration paint Color from white to transparent after overheating, irreversible discoloration, suitable for rough oil surface, Measuring temperature 70 ℃, Net weight of plastic bottle 100 grams.

$ 131.00

Temperature sensitive discoloration paint after overheating Color from white to transparent, irreversible discoloration, suitable for rough oil surface, Measuring temperature 60 ℃, Net weight of plastic bottles 100 grams.

$ 131.00

Irreversible discoloration design, temperature accuracy 50 ℃, circular single grid structure, specification 2x2cm, Pressure sensitive adhesive to ensure firm paste, suitable for temperature monitoring in harsh environments.

$ 88.00

Irreversible discoloration records the temperature. When the temperature is exceeded, the window is obviously visible from white to red. It has an oil-proof and waterproof protective film and a adhesive backing for easy pasting. Each sheet is 120 pieces, and the shelf life is 2-3 years.

$ 150.00

With 5 temperature monitoring points, Temperature range 77 ° C to 99 ° C, irreversible discoloration record, oil and water resistance, BS EN ISO 9001 compliant, with a sticker on the back for easy installation.

$ 92.00

Temperature range of 50~ 120 ℃, irreversible discoloration, over-temperature grid window from white to red, clear contrast, suitable for indoor and outdoor equipment temperature display.

$ 140.00

Glass sensitive film fully sensing semi-solid pH value, built-in 100K temperature resistor real-time monitoring of sample temperature, gel KCL reference solution to ensure long-term stable ElectRode work.

$ 106.00

Adopting irreversible discoloration technology, when the temperature exceeds 70 ° C, it turns from white to black and displays numbers. The size is 60 * 8mm rectangular design, which is convenient for inspection to find temperature abnormalities and prevent failures.

$ 85.00

Articles

Application of High-Temperature Viscometer in Testing the Melt Viscosity Characteristics of Hot Melt Ink
This article introduces a method for testing the melt viscosity of hot-melt ink using a high-temperature viscometer. The test employs a rotational viscometer to measure the viscosity of three ink samples at different temperatures.
Application of High-Temperature Universal Testing Machine in the Study of Hot Modulus of Rupture of Refractory Materials
This article introduces the application of a high-temperature universal testing machine in measuring the hot modulus of rupture of refractory materials. It explains the working principle, testing procedure, and key parameters of the testing machine, such as the effects of heating rate, holding time, and loading rate.
How is a high-temperature muffle furnace applied in ash determination?
This article introduces the application of high-temperature muffle furnaces in ash determination. The principle of ash determination involves completely burning the sample at high temperatures, leaving behind inorganic mineral residues. The muffle furnace provides a stable and controllable thermal environment, ensuring accurate results.
Ultrasonic Thickness Gauge Selection: Technical Considerations for Probe Configuration and Measurement Modes
This article primarily introduces the technical factors to consider when selecting an ultrasonic thickness gauge. In terms of probe configuration, the frequency affects both resolution and penetration depth, while crystal size determines adaptability to curvature and surface conditions. Dual-element probes offer a smaller dead zone compared to single-element probes, and delay-line probes are suitable for thin-wall and high-temperature applications.
Application of Three-Chamber High and Low Temperature Test Chambers in Rapid Temperature Cycling for Electronic Products
The three-chamber high-low temperature test chamber is used for reliability testing of electronic products, enabling rapid temperature transitions through independent high temperature, low temperature, and test zones. Compared to traditional single-chamber equipment, it reduces temperature change time and enhances testing efficiency.
High-temperature viscometer evaluates the flow characteristics of ceramic coatings before sintering.
This article introduces how to use a high-temperature viscometer to evaluate the flow characteristics of ceramic coatings before sintering. During measurement, the instrument detects changes in the viscosity of the coating sample under simulated sintering temperature conditions using rotational or oscillatory principles.
High-temperature viscometer measures the flow behavior of powder coatings in the molten state.
This article introduces the use of a high-temperature viscometer to measure the flow behavior of powder coatings in their molten state. Powder coatings need to melt and flow before curing, a process that directly affects the smoothness and performance of the coating.
Temperature uniformity of high-temperature aging test chamber for UV resistance testing of inks
This article discusses how the temperature uniformity of high-temperature aging test chambers affects the accuracy of ink UV resistance testing. Temperature uniformity refers to the deviation in temperature at various points inside the chamber, with smaller deviations leading to more reliable test results.
High-temperature aging test chamber accelerates life testing of electronic components.
The high-temperature aging test chamber accelerates the physical and chemical changes within electronic components by simulating high-temperature environments, thereby predicting their long-term performance and failure modes.
Thermal shock test chamber measures the thermal shock resistance of polymer films.
This article introduces how to test the thermal shock resistance of polymer films using a thermal shock test chamber. The test involves rapidly switching the film between high and low temperatures to simulate the drastic temperature changes that may occur in actual use, thereby generating thermal stress within the material.
Hot air aging oven measures the long-term thermal-oxygen life of engineering plastics.
This article introduces how to use a hot air aging oven to test the long-term thermal-oxidative lifespan of engineering plastics. The test is based on the Arrhenius equation, which accelerates material aging at high temperatures to simulate performance changes under actual usage conditions.
Melt flow index tester measures the processing fluidity of high-temperature engineering plastics.
This article introduces how a melt flow indexer measures the processing fluidity of high-temperature engineering plastics. It first explains the working principle of the instrument, which involves measuring the rate at which molten plastic passes through a standard die under specific temperature and pressure conditions to obtain the melt flow rate value.
High-temperature aging chamber for testing thermal-oxidative aging of plastic films.
This article introduces the method of testing the thermo-oxidative aging of plastic films using a high-temperature aging chamber. Thermo-oxidative aging refers to the chemical changes that occur in plastics under high temperature and oxygen exposure, leading to a decline in performance.
Humidity and heat test chamber tests the moisture absorption rate of resin under high temperature and high humidity conditions.
This article introduces the method of using a hygrothermal test chamber to measure the moisture absorption rate of resin under high temperature and high humidity conditions.
Humidity and Heat Test Chamber for Evaluating Coating Performance under High Temperature and High Humidity Conditions
This article introduces how a humidity and heat test chamber is used to evaluate the performance of coatings in high-temperature and high-humidity environments. Coatings are widely used in industries such as automotive and electronics, but they are prone to issues like reduced adhesion and blistering under actual high-temperature and high-humidity conditions.