Supports iron-based and non-iron-based material measurement with accuracy of +/- 1~ 3% or +/- 2.5 µm, provides split Probe for enhanced maneuverability, automatically recognizes matrix materials and remembers calibrated values.
With iron-based and non-iron-based dual-use function, resolution up to 0.1um, test range 0~ 1250um, support single and continuous measurement, automatic identification of matrix material, stable and portable operation.
Measurement range 0-999 ppb with accuracy +/- 20 ppb +/- 5% for rapid iron concentration detection.
Laminating-free black and white half design, size 98 * 152mm, Encasement specification 100 sheets/bag, suitable for Coating inks film hiding power performance detection experiment.
Black part reflectance less than 1, white part reflectance 80 +/- 2, Laminating design enhanced anti-Curl ability, suitable for spreading rate testing, area of 0.1 square Meters.
4 groups of samples can be tested at the same time, using PID temperature control accuracy of 0.1 ℃, support segmented program heating, one key automatic calculation of carbon black and ash content, open the lid structure heat dissipation fast.
4 groups of samples can be tested at the same time, using PID precise temperature control technology, Temperature range from room temperature to 1000 ℃, with automatic calculation of carbon black content and ash content function, open lid structure heat dissipation effect is better.
Made of non-fluorescent paper, does not contain Fluorescent Whitening Agent, the black part reflectance is less than 1, the white part reflectance is 80 +/- 2, the surface is smooth and anti-Curl, and the test area is 0.1 square Meters.
Using magnetic Induction and eddy Current dual principle, Measurement range 0~ 1250μm, Probe with line can measure grooves and complex positions, automatically identify iron and non-iron substrates, with single point and two point Adjustment.
Measurement range 0.00-5 mg/L, Color intensity is proportional to concentration, providing 100 tests, suitable for the analysis of iron content in various liquid samples.
Black part reflectance less than 1, white part reflectance 80 +/- 2, no Laminating design to enhance paint wettability, avoid checking or cissing, suitable for specific spreading rate brushing tests.
It can reduce the noise of the air Compressor by 10dB. The iron shell structure is sturdy and durable, and it is equipped with wheels for easy movement. It is suitable for noise reduction requirements of air Compressors with different pump heads.
Using 2.0MHz Frequency Probe, Measurement range 2.0~ 400.0mm, dedicated to the thickness detection of coarse crystal materials such as cast iron, the lower limit of pipe measurement Φ 30 * 4mm.
The thermal weight loss method is used to measure carbon black content, the operating temperature can reach 990 ° C, and the 7-inch Touchscreen is equipped to realize one-button calculation, support segmented paraMeter setting, and the Furnace body separation design has better heat dissipation.
Using 140 * 250mm black and white half design, no Laminating surface to ensure detection accuracy, suitable for hiding power performance testing, Encasement specification of 100 sheets/pack for experimental use.
