Driven by stepper motor, folding speed 10-200cpm, adjustable test angle 10-180 °, with automatic counting and disconnection automatic stop function to ensure Test accuracy.
Using photoelectric control technology implementation automatic return, can measure 0~ 99999 times folding range, support 135 +/- 2 ° angle stepless adjustment, with data statistics and thermal printing function.
Stepping motor drive to achieve High Accuracy positioning, test angle 10~ 180 degrees adjustable, folding speed 10~ 200cpm can be set, with automatic counting and disconnection automatic stop function.
Using photoelectric control technology implementation folding chuck automatic return, measurement range 0~ 99999 times, folding speed 175 +/- 10cpm, support multi-sample data statistics and thermal print output.
The device places the test plate in parallel in the wind tunnel, the wind speed control accuracy is 3 +/- 0.3m/s, the drying time is automatically controlled, and the surface crazing can be visually inspected, which is suitable for the evaluation of coating anti-crack performance.
Using stain removal rate evaluation method, scruf speed 37cpm, load 1000g, can accurately adjust the liquid Flow rate, by measuring the reflection coefficient changes to evaluate the stain resistance of coatings.
Scruf Travel 300mm, speed 37cpm, total weight of brush and brush holder 450g, suitable for architectural coatings coating scrub resistance testing, in line with national standards.
The equipment is designed according to the international coating stain resistance experimental method, the water Tank volume is 5L, the inner diaMeter of the flow pipe is 8mm, and the time control range is 0~ 99h99s. It is suitable for the stain resistance test of building exterior coatings.
The device provides 3 +/- 0.3m/s wind speed through axial flow fan in wind tunnel, Timer delay range of 0.01 seconds to 99 hours 99 minutes, can automatically control drying time and eye test plate surface crazing, support parallel test.
The wind speed is controlled in the range of 3 +/- 0.3m/s, equipped with axial flow fan and automatic timing function, which can simulate the drying process under specified conditions and effectively detect the surface crazing of the material.
It is compacted by 14,000 tons of hydraulic press, with a density of 1.5-1 g/cm ³ and a flexural strength of air drying ≥ 21Mpa. It has A-class non-combustibility, sound insulation and heat insulation, water resistance and moisture resistance performance, convenient construction and green environmental protection.
Smooth matte surface does not contain plasticizer, reflectance < 4%, thickness 0.25 +/- 0.02mm, to ensure test data Repeatability and comparability, in line with national standards.
With 450 +/- 2g brush weight and 300mm scrubbing Travel, scrubbing speed 37 +/- 2cpm, can accurately test the anti-scrubbing performance of coatings, suitable for interior and exterior wall coating inspection.
Contains 1026 standard Colors, conforming to the National Standard for Architectural Color Representation Methods, displaying 6 color samples per page, suitable for architectural color selection and management.
Adopting quadrilateral pyramid-shaped net hole structure, the number of lines is 160LPI, the width of the printing surface is 70mm, and the surface chrome plating treatment enhances Abrasion Resistance and corrosion resistance, prolonging the service life.
