Vacuum environment significantly reduces the boiling point of liquid, suitable for heat-sensitive substances; drying Temperature range RT + 50~ 200 ℃, Vacuum Level < 133Pa; inert conditions prevent oxide explosion, powder sample stability does not move.
Cuboid studios improve space utilization, drying time is shortened by more than 40% compared with traditional equipment; double-decked tempered Glass doors are easy to observe, and mechanical Dial vacuum Meters can achieve 133Pa Vacuum Level.
Double station design can process two samples at the same time, Vacuum Level up to -0.098MPa, drying time only 4-6 minutes, suitable for rapid drying of wet paper samples with a diaMeter of no more than 200mm.
Using vacuum environment to reduce the boiling point of liquid, drying temperature RT + 10~ 250 ℃, vacuum degree of 133Pa, can effectively shorten the powder sample drying time and prevent oxidation, double-decked Glass door is easy to observe.
Cuboid Studio improves volume utilization, drying time is reduced by more than 40% compared with traditional Vacuum Chamber, Temperature range RT + 10~ 200 ℃, Vacuum Level up to 133Pa, double-decked Glass door is easy to observe.
Vacuum heating drying technology, Vacuum Level up to -0.098MPa, pumping 80-120 liters/min, drying time is only 4-6 minutes, with intelligent PID temperature control and over-temperature alarm function, easy and safe operation.
Vacuum environment can reduce the boiling point of liquid to less than 133Pa, effectively shorten the drying time of powder samples; inert conditions eliminate the risk of oxide explosion, independent heating tube design supports delamination temperature control, to ensure Temperature uniformity.
The vacuum environment can reduce the boiling point of the liquid to 133Pa, effectively shorten the drying time of the powder sample; the inert condition eliminates the risk of oxide explosion, and the independent heating design ensures temperature uniformity.
The vacuum environment significantly reduces the boiling point of the liquid to below 133Pa, the temperature control accuracy reaches +/- 0.5 ° C, and supports independent temperature control of delamination; the stainless steel liner and the explosion-proof Glass door ensure the safe and efficient drying of heat-sensitive substances.
Microcomputer temperature control technology, Temperature Fluctuation +/- 1%, Vacuum Level < 133Pa, equipped with high temperature silicone rubber sealing strip and tempered Glass door, support inert gas filling, suitable for heat sensitive material drying.
Cuboid studio improves volume utilization, drying time is reduced by more than 40%; Temperature range RT + 10~ 200 ℃, Vacuum Level 133Pa; double-decked Glass door is easy to observe, can be filled with inert gas anti-oxidation, stainless steel liner is durable and easy to clean.
Cuboid Studio improves space utilization and shortens drying time by more than 40%; Double-decked Tempered Glass Door for easy observation, adjustable box door to ensure high Vacuum Level; Temperature range RT + 10~ 200 ℃, Vacuum Level up to 133Pa.
With programmed vacuum cycle control, the maximum number of cycles is 99 times, and the drying time is shortened by more than 50% compared with the traditional method; equipped with a digital vacuum Gauge, the control accuracy is +/- 1% to ensure a stable vacuum environment.
The vacuum environment significantly reduces the boiling point of liquids, handling heat-sensitive substances and preventing powder samples from moving. Temperature range is RT + 50~ 200 ℃, Vacuum Level is less than 133Pa, equipped with microcomputer intelligent control and double-decked explosion-proof Glass doors.
The cuboid studio is used to improve space utilization, and the drying time is reduced by more than 40% compared with traditional equipment; double-decked tempered Glass doors are easy to observe, and mechanical Dial vacuum Meters can achieve 133Pa Vacuum Level, which supports inert gas environment to prevent oxidation.
