Paperboard Bursting Tester

The cardboard bursting test machine uses a hydraulic system to apply uniform pressure, causing a rubber diaphragm to burst the sample, thereby measuring the bursting strength value. It is used to detect the bursting resistance of cardboard and is applied in the production and quality inspection of packaging materials.
Selection
When selecting, consider matching the test range with the sample strength, confirm the unit switching function, check if the pneumatic clamping is uniform, verify compliance with standards, pay attention to the alignment of the platen size with the specimen, and ensure the data output method meets recording requirements.

Terms

Standards

Instruments

Using seven-inch color LCD screen and friendly menu interface, easy to operate. Measurement range 250~ 5600Kpa, accuracy level 1, with power-down protection and thermal printing function, pneumatic clamping to ensure stable testing.

$ 1663.00

Using seven-inch color LCD screen display, Measurement range Cardboard 250-5600Kpa, chuck clamping method is pneumatic, modular integrated thermal printer and complete and detailed test data report.

$ 1663.00

Using high-speed ARM processor and 32-bit High Accuracy AD converter, Measurement range 250~ 5600kPa, resolution 0.1kPa, with explosion-proof film protection and over-range alarm function, support multi-unit switching and real-time pressure display.

$ 1284.00

15 minutes to quickly heat up to the set temperature, temperature control accuracy of +/- 0.5 ℃, using multi-point calibrated to eliminate temperature errors, standard imported Glass digestion tube resistant to sudden cooling and sudden heating without bursting.

$ 522.00

Measurement range 10~ 1600kPa, Precision ≤ +/- 0.3%, equipped with 7-inch Touchscreen real-time display test Linear dispersion and a variety of data, support automatic clamping and calibrating system.

$ 1764.00

Articles

Transverse Burst Strength Tester for the Evaluation of Impact Resistance of Corrugated Cardboard
This article explains how a lateral bursting strength tester is used to evaluate the impact resistance of corrugated cardboard. It measures the energy absorbed by the cardboard at the point of rupture using the pendulum impact principle, requiring the preparation of specimens according to standards and the control of environmental conditions during testing.
Application of Paperboard Burst Strength Tester in Packaging Materials
The paperboard bursting strength tester is a detection device used to measure the ability of packaging materials such as paperboard to resist rupture under vertical pressure. During the test, the sample is clamped between annular clamps, and increasing pressure is applied via hydraulic or pneumatic means until rupture occurs. The maximum pressure value is recorded as the bursting strength.
Key Operation Points of Carton Burst Strength Tester
The carton bursting strength tester is used to measure the maximum force that paperboard can withstand before rupturing under uniform pressure, which is important for packaging quality control. Before operation, ensure that the instrument is stable and the calibration is valid. The samples should be cut according to standards and conditioned under standard temperature and humidity conditions.
The role of the burst strength tester in the testing of cardboard packaging materials.
The burst strength tester is used to measure the bursting resistance of packaging materials such as cardboard. It applies uniform pressure through hydraulic or pneumatic means until the sample ruptures, recording the maximum pressure value to simulate compression and impact during transportation.