Hydraulic automatic pull-off test, the pull-off speed is stable and controllable, the accuracy is +/- 1% full scale, equipped with pull-off kit size 10-50mm, built-in rechargeable battery and 200,000 Data storage.
Adopt precision automatic control data collection system, range 3000N, accuracy class 0.5, with force holding and pull off stop function, support 100 groups of test Data storage and qualified judgment statistics.
With 0.5 accuracy class and 1000N range, support force holding time 0-999.9 seconds can be set, integrated pull-off stop and overload protection functions, easy and reliable operation.
Portable design built-in lithium battery, 0-3000p range accuracy +/- 1%, equipped with 10-50mm pull-off spindle, automatic calculation of pull-off force without conversion table, aluminum alignment unit to ensure uniform testing.
Adopt double guide Rod structure to ensure Stability, Maximum Measured value 5000N, Travel 220mm, support stepless speed regulation and a variety of test modes, with pull-off stop and force retention functions.
Equipped with a 20mm kit and trimmer, the range covers 0-20MPa, and precise positioning is achieved through a transparent sleeve, specially designed for high viscosity coating adhesion testing.
Adopt low-noise stepless speed regulation motor, with a speed range of 0-500mm/min, with force holding function and four test modes, equipped with limit protection device, support pull-off stop and set force value round-trip motion.
With 500N range and 0.5 Precision, support force holding and displacement controllable functions, can set the running speed of 10-200mm/min, integrated overload protection and Data storage, to meet a variety of testing needs.
Stepping motor and High Accuracy encoder ensure mechanical stability, displacement accuracy ≤ +/- 0.1mm, speed range 10-800mm/min, support force holding and pull-off stop function, equipped with limit and emergency protection device.
With 2000N range and 0.5 Precision, it supports force holding and displacement control functions, integrates overload protection, Data storage and printing, and is easy to operate and small in size.
Portable design with built-in lithium battery, equipped with Type-c interface and U disk storage, pull-off kit size 10-50mm optional, accuracy +/- 1% full scale, with pull-out Linear dispersion display function.
Adopting pneumatic working mode, the test rate can be adjusted from 5 to 60 times per minute, with 4 independent test stations, capable of simultaneously testing switches and plugs and sockets, and supports current on-off and mechanical counting methods.
High Accuracy S type sensor accuracy of 0.5%, range 0-10KN, with pull-off automatic stop function, three operation modes optional, can directly enter the test block area display force value and strength value
Measurement range 5~ 500μm, error +/- 10%, no power supply, durable, suitable for high temperature and difficult to contact surface measurement.
Maximum load 0.5KN, specially designed for pull ring samples, compact structure, easy installation, suitable for tensile testing of a variety of materials, providing reliable data support.
