The equipment is designed with double rollers, with a test load of 5kg, a drop height of 500 + 1000mm, and a rotation speed of 5-20 times/minute to meet the needs of continuous rotary drop testing.
Using the rotary oscillation mode, Oscillation Frequency up to 3000 rpm, swing amplitude of 5mm, through smooth contact to achieve rapid mixing, speed can be adjusted with pressure, suitable for a variety of laboratory applications.
Adopt rotary vane structure design, pumping rate up to 2L/s, Ultimate vacuum degree 6x10 ^ -2Pa, equipped with Φ 25mm standard interface, support long-term continuous operation, especially suitable for vibration and noise sensitive experimental environment.
The homogenizing time is up to 3000 seconds, the speed range is 100-10000rpm, and the acceleration is 100-10000rpm/s. It supports multi-stage program control. Vacuum chuck ensures the stability of the substrate and is suitable for assembly line processes.
The equipment can perform continuous rotary drop test, drop height up to 1000mm, Test speed 5-20 times/min, suitable for Reliability verification of small electronic pRoducts.
Brushless motor to avoid Toner contamination of samples and reduce noise. The processing capacity covers 150 ml to 6 liters, supports a variety of head Modular replacements, and the intelligent Touchscreen can set the program, timing, line speed and torque.
It can filtrate water vapor impurities and protect Vacuumpump to prolong its life. It is made of non-wOven fabric and has a joint diaMeter of KF25. It is suitable for small rotary vane Vacuumpump with pumping speed ≤ 6L/s.
Rotary oscillation with 0~ 300rpm Frequency range, temperature control accuracy of +/- 1 ℃, with 5~ 120 minutes timing function, suitable for a variety of compounds thermostatic foster needs.
Using rotary oscillation mode, Oscillation Frequency 0~ 300rpm adjustable, temperature control accuracy +/- 1 ℃, with 5~ 120 minutes timing function, suitable for a variety of compounds thermostatic foster needs.
The integrated pump body structure is adopted, and the oil pump is forced to lubricate and control. The ultimate pressure is as low as 0.005mbar, the noise is only 58dB, and the parts are few and easy to maintain.
The pumping rate is 4L/s, the noise value is 68dB (A), the gas ballast valve is used to prevent the pump oil from mixing, the size is small and easy to start, and a variety of interface configurations are supported.
Temperature range RT +~ 60 ℃, Oscillation Frequency 0~ 300rpm, intelligent integrated circuit to achieve no drift temperature control, rotary oscillation mode to ensure uniform mixing.
The integrated pump body structure is adopted, and the forced oil pump lubrication system ensures stable operation. The ultimate pressure is as low as 0.005mbar, the noise is only 58dB, and the parts are few and easy to maintain.
The pumping rate is 0.5L/s, the noise is as low as 65dB (A), and it is equipped with a gas ballast valve to prevent the pump oil from mixing with water. It is compact in size, easy to start, and supports a variety of interface conversions.
With +/- 0.1 ℃ high temperature control accuracy and 0-200rpm Oscillation Frequency, using rotary oscillation and 8-hole design to ensure experimental Temperature uniformity and Sample Handling conformity.
