Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
Wire-wound structure ensures 0.1 micron High Accuracy, wet film thickness 50.3 μm, stainless steel material is durable and easy to clean, and the wide-Rod Film Applicator achieves uniform coating.
A groove control film is formed on the smooth Rod body by extrusion process. The wear-resistant stainless steel material is not easy to break the wire and is easy to clean. The wet film thickness is 105.2 μ m and the application width is 300mm.
Wire-wound design wet film thickness 11.4μm, wire diaMeter Φ 0.13mm, not easy to block and easy to clean, suitable for a variety of substrates, to achieve uniform Spreader and flexible thickness adjustment.
Wire-wound design, wet film thickness 118.9μm, diaMeter 9.5mm, stainless steel material, wear resistance and corrosion resistance, suitable for preparing specific film thickness wet-film.
Wire-wound design can be prepared with different thickness wet-film, wet-film scale accuracy up to 1 micron, application width 140mm, stainless steel material to ensure durability and uniform Spreader effect.
Wire-wound process, wet film thickness 6μm, application width 140mm, stainless steel material to ensure durability and accurate Spreader effect, suitable for preparing uniform film samples.
A wet film of 148.6 μm can be prepared using a wire-wound process with a 1.65 mm wire diaMeter, ensuring accurate and durable coating while preventing wire breakage issues.
Wire-wound design, wet film thickness of 102.9μm, wire diaMeter Φ 1.14mm, effective application width 1500mm, not easy to block and easy to clean, suitable for high viscosity coatings.
Using stainless steel material and excellent wire-wound process, wet film thickness 148.6μm, application width 300mm, to ensure accurate and durable film, to avoid the problem of broken wire.
Using a wire-wound coating process, with a wet film thickness of 32.0 μm and a coating width of 300 mm, it is suitable for substrates prone to curling and convexity, enabling uniform wet film coating, with a wire diaMeter of 0.36 mm.
Wire-wound process, wet film thickness 11.4μm, wire diaMeter 0.13mm, ensure Spreader Uniformity and High Accuracy, suitable for a variety of experimental environments.
Wire-wound design can achieve 80 micron wet film thickness, diaMeter 9 mm, total length 245 mm, suitable for comparison specimens, one Spreader can handle a variety of Coatings.
Wire-wound process is prepared with 6.9 μm wet-film, and the diaMeter of the steel wire is only 0.08mm. If the hair is thin, seamless winding reduces the risk of broken wire, and is suitable for a variety of fluid Spreader applications.
Using a wire-winding process, it precisely controls a wet film thickness of 64.0 microns, with stainless steel material ensuring durability and consistency.
